Aller au contenu principal
Accès ouvert déclaré 2025 article

Estimation of Near-Surface Loosened Rock Mass Zones in Mountainous Areas by Using Helicopter-Borne and Drone-Borne Electromagnetic Method for Landslide Susceptibility Analysis

2Citations signalées, ce qui n’est pas une note de qualité
3Institutions déclarées
1Pays d’affiliation déclarés

Rattachement africain : jp. Niveau de preuve : code pays fourni par la source.

Le résumé fourni par la source

Mapping methods for loosened rock mass in mountainous areas are useful for risk management of landslide disasters. Depending on the type of aircraft and sensor, there are several different aerial electromagnetic measurement methods for estimating subsurface structures. Helicopter-borne electromagnetic methods are commonly used. Recently, unmanned aerial vehicles (drones) have been used. By understanding the characteristics of each method, it is possible to choose a suitable method for the target of observation. In this study, resistivity from the frequency-domain helicopter-borne electromagnetic (HEM) method and resistivity from the time-domain drone-grounded electrical-source airborne transient electromagnetic (D-GREATEM) method were compared to estimate loosened zones in mountainous areas. The resistivity cross-sectional profiles were largely similar, but differences were observed near the surface in some zones. The comparative analysis of both methods with outcrop observations revealed that D-GREATEM resistivity data can detect both loosened rock mass from the surface to an approximately 30 m depth located above the groundwater and saturated rock mass. It is because D-GREATEM resistivity was obtained by assuming five layers from the surface to a depth of 40 m. This indicates that D-GREATEM is suitable for estimating near-surface loosened rock mass distribution in the valleys. However, D-GREATEM has a limited observation range. Therefore, it was concluded that the D-GREATEM method is suitable for a detailed and localized estimation of landslide susceptibility near the surface, whereas the HEM method is suitable for wide-area analysis.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.

Le contrôle bibliographique ouvert

DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.

Titre Crossref
Estimation of Near-Surface Loosened Rock Mass Zones in Mountainous Areas by Using Helicopter-Borne and Drone-Borne Electromagnetic Method for Landslide Susceptibility Analysis
Date Crossref
25/06/2025
Éditeur
MDPI AG
Type
journal-article

Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.

Où se fait cette recherche

  • Kagawa University Institution of Education pays non établi dans la notice
    Université ou école supérieure
  • Shikoku (Japan) pays non établi dans la notice
    Entreprise
  • Ltd. (Japan) Dia Nippon Engineering Consultants Co. pays non établi dans la notice
    Entreprise
  • Faculty of Engineering and Design pays non établi dans la notice
    Université ou école supérieure
  • NeoScience Co. pays non établi dans la notice
    Institution
  • Graduate School of Science for Creative Emergence pays non établi dans la notice
    Université ou école supérieure
  • Graduate School of Engineering pays non établi dans la notice
    Université ou école supérieure

Institution of Education — Kagawa University, Shikoku (Japan) et Dia Nippon Engineering Consultants Co. — Ltd. (Japan), avec 4 autres affiliations.

Une affiliation ne permet pas de déduire la nationalité d’un auteur.

Les sujets associés

Landslides and related hazardsEarthquake Detection and AnalysisGeotechnical and Geomechanical Engineering

BNTIC News n’est pas le producteur de ces données. Les publications sont interrogées à la demande dans Crossref, OpenAIRE, DOAJ, Europe PMC, HAL, DataCite, AfricArXiv, ROR et la Banque mondiale, sans clé d’accès. OpenAlex reste optionnel. Aucun service payant n’est nécessaire et aucune donnée externe n’est enregistrée en base. Consulter les sources et leurs limites.