Fracture characterization of woven CFRP laminates-Mode I and III loading
Rattachement africain : cn. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
The fracture characteristics of woven carbon fiber reinforced polymer (CFRP) under Mode I and III loading were analyzed. Two tensile testing configurations and experimental methods for simple tests under Mode I and III were employed. The Double Cantilever Beam (DCB) configuration allows for fracture characterization in pure Mode I considering the same specimen arms, using the TDCB model as the specimen’s far-field boundary. Under pure Mode III loading, out-of-plane tension at the end notch was used for fracture characterization. For R curve testing, R curves of Mode I and Mode III Tapered Double Cantilever Beam (TDCB) specimens were obtained with the assistance of infrared sensors and a servo control algorithm. During crack propagation, the stress state in the stress singularity region on crack tip was captured in detail using digital image correlation (DIC) technology. Finally, a mode partitioning method based on Cohesive Zone Model (CZM) was used for the simulation and accuracy prediction of Mode I and III mixed-mode crack propagation. These methods effectively simulated and studied the fracture behavior of composites under complex stress conditions, and provide insights into composite fracture behavior under complex stress, crucial for aerospace and automotive applications where CFRP enhances safety, reliability, and fuel efficiency.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Fracture characterization of woven CFRP laminates-Mode I and III loading
- Date Crossref
- 26/05/2025
- Éditeur
- SAGE Publications
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Jiangxi University of Technology pays non établi dans la noticeUniversité ou école supérieure
-
Jiangxi Academy of Sciences pays non établi dans la noticeOrganisme public
-
Guangdong University of Technology Key Laboratory of Photonic Technology for Integrated Sensing and Communication pays non établi dans la noticeUniversité ou école supérieure
-
Chinese Academy of Sciences pays non établi dans la noticeOrganisme public
-
Shenyang National Laboratory for Materials Science pays non établi dans la noticeStructure de recherche
-
Jiangxi University of Software Professional Technology pays non établi dans la noticeUniversité ou école supérieure
-
Institute of Applied Physics pays non établi dans la noticeStructure de recherche
-
Institute of Metal Research pays non établi dans la noticeStructure de recherche
Jiangxi University of Technology, Jiangxi Academy of Sciences et Key Laboratory of Photonic Technology for Integrated Sensing and Communication — Guangdong University of Technology, avec 5 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.