Validation of the Aeolus L2A products with the eVe reference lidar measurements from the ASKOS/JATAC campaign

Le résumé fourni par la source

Abstract. Aeolus was an ESA Earth Explorer satellite mission launched in 2018 with a lifetime of almost five years. The mission carried the Atmospheric Laser Doppler Instrument (ALADIN), a doppler wind lidar for providing wind profiles in global scale and also vertically resolved optical properties of particles (aerosols and clouds) using the high spectral resolution lidar technique. To validate the particles’ optical properties obtained from Aeolus as Level 2A products, the eVe lidar, ESA’s reference system for the calibration and validation of Aeolus mission, has been deployed at the ASKOS campaign in the framework of the Joint Aeolus Tropical Atlantic Campaign (JATAC). ASKOS is the ground-based component of JATAC where ground-based remote sensing and in-situ instrumentation for aerosols, clouds, winds and radiation observations has been deployed at Cado Verde during summer 2021 and 2022 for the validation of the Aeolus products. The eVe lidar is a combined linear/circular polarization and Raman lidar specifically designed to mimic the operation of Aeolus and provide ground-based reference measurements of the optical properties for aerosols and thin clouds for the validation of the Aeolus L2A products while taking into consideration the ALADIN’s limitation of misdetection of the cross-polar component of the backscattered signal. As such, in the validation study the Aeolus L2A profiles obtained from the Standard Correct Algorithm (SCA), the Maximum Likelihood Estimation (MLE), and the AEL–PRO algorithms of Baseline 16 and free from the cloud contaminated bins are compared against the corresponding cloud-free Aeolus like profiles from eVe lidar, which are harmonized to the Aeolus L2A profiles, using the 14 collocated measurements between eVe and Aeolus during the nearest Aeolus overpass from the ASKOS site. The validation results reveal good performance for the co-polar particle backscatter coefficient being the most accurate L2A product from Aeolus with overall errors up to 2 Mm-1sr-1, followed by the noisier particle extinction coefficient with overall errors up to 183 Mm-1, and the co-polar lidar ratio which is the noisiest L2A product with extreme error values and variability. The observed discrepancies between eVe and Aeolus L2A profiles increase at lower altitudes where higher atmospheric loads, which lead to increased noise levels in the Aeolus retrievals due to enhanced laser beam attenuation, and greater atmospheric variability (e.g. PBL inhomogeneities) are typically encountered. Overall, this study underlines the strengths of the optimal estimation algorithms (MLE and AEL–PRO) with consistent performance and reduced discrepancies, while the standard inversion algorithm (SCA), which was originally developed, could be further improved particularly in the retrieval of the particle extinction coefficient and lidar ratio. In addition, the SCA–Mid bin resolution profiles outperform the corresponding SCA–Rayleigh bin as expected, since Mid bin resolution is obtained when averaging the values from two consecutive SCA–Rayleigh height bins.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.