Aller au contenu principal
Accès ouvert déclaré 2025 article

Optimizing acoustic vibration performance in Sitka spruce via grain inhomogeneity analysis: A hybrid approach of image processing and vibro-acoustic characterization

0Citations signalées, ce qui n’est pas une note de qualité
1Institutions déclarées
1Pays d’affiliation déclarés

Rattachement africain : cn. Niveau de preuve : code pays fourni par la source.

Le résumé fourni par la source

The inhomogeneity of the cross-sectional grain of Sitka spruce wood was analyzed using image processing techniques, and the influencing mechanism of this inhomogeneity on the acoustic vibration properties of the wood was investigated. The inhomogeneity of grain width was characterized by the average deviation of the growth ring width and latewood rate of the test specimens. The inhomogeneity of grain position distribution was characterized by the average deviation of the variation in growth ring width. The influence of the inhomogeneity of these grains on the acoustic vibration properties of the wood was investigated respectively. The results showed that as the inhomogeneity of the growth ring width and the growth ring width variation increase, the values of the specific modulus of elasticity (E/ρ), acoustic radiation quality constant (R), and acoustic impedance (ω) of the wood decrease, while the value of the loss angle tangent (tan δ) increases. As the inhomogeneity of the latewood rate increases, the values of E/ρ and R of the wood decrease, and the value of tan δ increases. The inhomogeneity of the latewood rate has no significant effect on ω. When the width of growth rings was between 0.14 cm and 0.17 cm while the deviation of the growth ring width ranged from 0.024 to 0.036 and the deviation of the width variation ranged from 0.016 to 0.020, the wood had relatively large values of E/ρ and R and a relatively small tan δ value, leading to better acoustic vibration performance. Similarly, when the latewood rate was between 15% and 20% and the deviation of the latewood rate ranged from 0.030 to 0.045, the wood had relatively large values of E/ρ and R and a relatively small tan δ value, leading to better acoustic vibration performance. This result provides more reference data for the rational selection of materials for musical instruments.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.

Le contrôle bibliographique ouvert

DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.

Titre Crossref
Optimizing acoustic vibration performance in Sitka spruce via grain inhomogeneity analysis: A hybrid approach of image processing and vibro-acoustic characterization
Date Crossref
17/04/2025
Éditeur
Academic Publishing Pte. Ltd.
Type
journal-article

Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.

Où se fait cette recherche

  • Northeast Forestry University Key Laboratory of Bio-Based Material Science & Technology of Ministry of Education pays non établi dans la notice
    Université ou école supérieure
  • College of Computer and Control Engineering pays non établi dans la notice
    Université ou école supérieure

Key Laboratory of Bio-Based Material Science & Technology of Ministry of Education — Northeast Forestry University et College of Computer and Control Engineering.

Une affiliation ne permet pas de déduire la nationalité d’un auteur.

Les sujets associés

Wood Treatment and PropertiesTree Root and Stability StudiesBamboo properties and applications

BNTIC News n’est pas le producteur de ces données. Les publications sont interrogées à la demande dans Crossref, OpenAIRE, DOAJ, Europe PMC, HAL, DataCite, AfricArXiv, ROR et la Banque mondiale, sans clé d’accès. OpenAlex reste optionnel. Aucun service payant n’est nécessaire et aucune donnée externe n’est enregistrée en base. Consulter les sources et leurs limites.