Numerical simulation and control of early‐age cracking in a concrete cap beam: Considering high‐strength concrete and constraint of formwork
Rattachement africain : cn. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
Abstract Bridge cap beams, which are crucial components that connect girders and piers, are also prone to early‐age cracking despite the relatively small volume. This paper presents a thermo‐mechanical simulation of the construction process of a cap beam in a specific engineering project, analyzing the causes of early cracking. Unlike previous studies, this research places emphasis on the thermal parameters of high‐strength concrete (HSC) and the constraining effects of formwork. The study successfully reproduced the temperature, stress, and crack development during the cap beam's casting process. It was found that the use of HSC, combined with the accelerated construction schedule requiring a single‐pour method, led to concentrated heat generation during the early hydration reaction, resulting in cracking failure. Finally, the cracking was successfully avoided by implementing the embedded cooling pipes technique. The simulation method and preventive measures proposed in this paper regarding the early‐age cracking behavior of concrete are recommended for practical applications.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Numerical simulation and control of early‐age cracking in a concrete cap beam: Considering high‐strength concrete and constraint of formwork
- Date Crossref
- 07/04/2025
- Éditeur
- Wiley
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Tongji University pays non établi dans la noticeUniversité ou école supérieure
-
SGIDI Engineering Consulting (China) pays non établi dans la noticeEntreprise
-
Shanghai Municipal Engineering Design Institute (Group) Co. pays non établi dans la noticeEntreprise
-
Ganzhou Construction Engineering Group Jiangxi China pays non établi dans la noticeInstitution
Tongji University, SGIDI Engineering Consulting (China) et Shanghai Municipal Engineering Design Institute (Group) Co., avec 1 autre affiliation.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.