Combining in-situ technology to study the influence of bainite morphology on the strength and toughness properties of medium-carbon bainitic steel
Rattachement africain : cn, tr. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
The microstructure of bainitic steel was controlled through continuous cooling in the medium-temperature region. The influence of cooling rate on the microstructure and its effects on the strength and toughness of bainitic steel were investigated using transmission electron microscope (TEM), electron backscatter diffraction (EBSD), and X-ray diffraction (XRD). Experimental results indicate that as the cooling rate increases from 0.1 to 4°C/s, the microstructure evolves from granular bainite to lath bainite, characterized by a high-density interface. At higher cooling rates, the samples exhibit enhanced strength and impact energy, attributed to dislocation strengthening and fine-grained strengthening mechanisms. Additionally, the presence of high-angle grain boundaries and filmy retained austenite within the microstructure contributes to improved toughness. Conversely, at a cooling rate of 0.1°C/s, martensite/austenite(M/A) constituents and low-stability massive retained austenite do not favorably influence toughness improvement; however, increased retained austenite delays necking onset and promotes uniform plastic deformation. Combining in-situ phase transformation and tensile analysis, it is evident that phase transformations significantly affect tensile strain distribution. Specifically, temperature selection and the driving force for phase transformation influence the variation in size and orientation, thereby affecting strain distribution during tensile testing.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Combining in-situ technology to study the influence of bainite morphology on the strength and toughness properties of medium-carbon bainitic steel
- Date Crossref
- 01/05/2025
- Éditeur
- Elsevier BV
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Yanshan University State Key Laboratory of Metastable Materials Science and Technology pays non établi dans la noticeUniversité ou école supérieure
-
Guangzhou Maritime College pays non établi dans la noticeUniversité ou école supérieure
-
North China University of Science and Technology Hebei Iron and Steel Laboratory pays non établi dans la noticeUniversité ou école supérieure
-
TED University pays non établi dans la noticeUniversité ou école supérieure
-
Guangzhou Maritime University Guangdong Provincial Key Laboratory of Nanhai Microbial Mineralization Technology and Application pays non établi dans la noticeUniversité ou école supérieure
State Key Laboratory of Metastable Materials Science and Technology — Yanshan University, Guangzhou Maritime College et Hebei Iron and Steel Laboratory — North China University of Science and Technology, avec 2 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.