Aller au contenu principal
2025 article

Adsorption–Desorption–Seepage Characteristics and Deformation Mechanism of Confined Coal for Flue Gas under Different Water Saturations

4Citations signalées, ce qui n’est pas une note de qualité
1Institutions déclarées
1Pays d’affiliation déclarés

Rattachement africain : cn. Niveau de preuve : code pays fourni par la source.

Le résumé fourni par la source

The excessive discharge of flue gas degrades air quality, while its injection into coal seams mitigates pollution and enables carbon dioxide storage. This study investigates the adsorption, desorption, and seepage mechanisms of flue gas in coal seams through gas–solid coupling tests under triaxial stress for coal samples with varying water saturation. The results indicate that under constant coaxial and confining pressures, the adsorption capacity, desorption capacity, and seepage rate of flue gas exhibit a significant decline with increasing water saturation. Additionally, the equilibrium times for desorption and seepage are reduced, while the equilibrium time for adsorption is extended. During the processes of adsorption, desorption, and seepage, both axial and radial strains in the coal decrease with increasing water saturation or axial/confining pressure, with the axial strain consistently lower than the radial strain. Gas component analysis reveals nitrogen (N 2 ) dominance during initial desorption, with carbon dioxide (CO 2 ) and methane (CH 4 ) increasing as desorption progresses. Further analysis demonstrates a significant linear relationship between the axial and radial strains of coal and the gas seepage rate. As the effective stress or water saturation increases, both the diffusion coefficient and dimensionless permeability exhibit a declining trend under the same water saturation conditions. Under dry conditions, the effective stress sensitivity coefficient decreases with increasing effective stress. In contrast, under high water saturation conditions, the effective stress sensitivity coefficient displays a more complex pattern, becoming more pronounced as water saturation rises. These studies help to understand the influence of water saturation and stress on the behavior of flue gas in coal and provide a theoretical basis for optimizing coal bed methane extraction and carbon sequestration.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.

Le contrôle bibliographique ouvert

DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.

Titre Crossref
Adsorption–Desorption–Seepage Characteristics and Deformation Mechanism of Confined Coal for Flue Gas under Different Water Saturations
Date Crossref
11/03/2025
Éditeur
American Chemical Society (ACS)
Type
journal-article

Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.

Où se fait cette recherche

  • Xi'an University of Science and Technology pays non établi dans la notice
    Université ou école supérieure
  • College of Safety Science and Engineering pays non établi dans la notice
    Université ou école supérieure
  • Western Coal Mine Gas Disaster Prevention and Control Key Laboratory of Shaanxi Province Higher Education Institutions pays non établi dans la notice
    Structure de recherche

Xi'an University of Science and Technology, College of Safety Science and Engineering et Western Coal Mine Gas Disaster Prevention and Control Key Laboratory of Shaanxi Province Higher Education Institutions.

Une affiliation ne permet pas de déduire la nationalité d’un auteur.

Les sujets associés

Coal Properties and UtilizationHydrocarbon exploration and reservoir analysisAtmospheric and Environmental Gas Dynamics

BNTIC News n’est pas le producteur de ces données. Les publications sont interrogées à la demande dans Crossref, OpenAIRE, DOAJ, Europe PMC, HAL, DataCite, AfricArXiv, ROR et la Banque mondiale, sans clé d’accès. OpenAlex reste optionnel. Aucun service payant n’est nécessaire et aucune donnée externe n’est enregistrée en base. Consulter les sources et leurs limites.