Characterization of a new 4He scintillator detector prototype for the ITER Radial Neutron Camera

Le résumé fourni par la source

• A new 4 He scintillator detector prototype was characterized for the ITER Ex-Port RNC using neutron beams of varying energies and intensities. • The detector exhibits linear response with neutron energy and linearity in count rate with neutron flux from 10 4 1/(cm 2 s) to 7 × 10 7 1/(cm 2 s). • For neutron fluxes above 10 6 1/(cm 2 s), a pile-up correction is required to maintain response linearity. • The 14.8 MeV-neutron detection efficiency in CB configuration was experimentally determined as ∼4 × 10 –3 . • The detector's performance is compatible with Q = 5 and Q = 10 ITER D-T scenarios, confirming its suitability for Ex-Port RNC applications. In ITER, the reconstruction of the neutron emissivity profile along radial Lines-Of-Sight (LOS) is performed with the Radial Neutron Camera (RNC) diagnostic system. Neutrons produced in the plasma core through D(d, n) 3 He and T(d, n) 4 He reactions are measured by the RNC Ex-Port subsystem using three different types of detectors located within modules positioned at the end of each LOS collimator: a plastic scintillator, a 4 He gas scintillator and a single-crystal diamond matrix. Considering plasma scenarios foreseen in ITER, measurements during full-power operations rely on the 4 He scintillator detector. A new prototype of this device, specifically designed for the ITER RNC system, has been developed and experimentally characterized. This work presents the results of the measurements performed at the Physikalisch-Technische Bundesanstalt (PTB) Ion Accelerator Facility (PIAF) in Braunschweig, focusing on the detector's response to different neutron energies, and at ENEA Frascati Neutron Generator (FNG), where its performance under high neutron fluxes was studied. The new 4 He scintillator detector prototype has proven to be suitable for its installation in the ITER RNC Ex-Port detector modules, and capable of reliable operation during the full-power scenarios of ITER operation.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.