Influence of heat treatment on the microstructural evolution of CoCrFeNi high-entropy alloy prepared by Selective Laser Melting
Rattachement africain : cn, at, cz. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
The CoCrFeNi high entropy alloy (HEA) is widely used in aerospace and nuclear industries due to its excellent performance. However, traditional manufacturing methods make manufacturing parts with complex structures difficult. In this study, CoCrFeNi high-entropy alloys were prepared by the Selective Laser Melting (SLM) method, and their microstructures and mechanical properties with different annealing heat treatments lasting from 3 min to ∼ 1440 min were investigated. The surface of the constructed CoCrFeNi HEA alloys displayed typical SLM microstructures and morphologies. With increasing the heat treatment time, the melt pool boundary gradually disappeared within 10 min. The microstructure quickly changed from the original fine columnar crystals to long ellipsoidal grains, and the grain boundaries became more susceptible to etching after heat treatment. The crystals developed slowly in the next 20 h. According to the EBSD results, the un-heat-treated SLM HEA samples exhibit <101> texture along the build direction, the grains grow significantly after heat treatment, and the texture changes in the build direction. The microhardness values of the CoCrFeNi high-entropy alloys decrease with the increase in heat treatment time.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Influence of heat treatment on the microstructural evolution of CoCrFeNi high-entropy alloy prepared by Selective Laser Melting
- Date Crossref
- 01/03/2025
- Éditeur
- Elsevier BV
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Chinese Academy of Sciences pays non établi dans la noticeOrganisme public
-
Ningbo Institute of Industrial Technology pays non établi dans la noticeStructure de recherche
-
Montanuniversität Leoben pays non établi dans la noticeUniversité ou école supérieure
-
Ningbo University of Technology pays non établi dans la noticeUniversité ou école supérieure
-
Brno University of Technology pays non établi dans la noticeUniversité ou école supérieure
-
Ningbo Institute of Materials Technology and Engineering pays non établi dans la noticeStructure de recherche
-
Chair of Casting Research pays non établi dans la noticeInstitution
-
China SciLong Lightweight Technology Co. pays non établi dans la noticeOrganisation à but non lucratif
-
School of Mechanical and Automotive Engineering pays non établi dans la noticeUniversité ou école supérieure
-
Faculty of Mechanical Engineering Heat Transfer and Fluid Flow Laboratory pays non établi dans la noticeUniversité ou école supérieure
Chinese Academy of Sciences, Ningbo Institute of Industrial Technology et Montanuniversität Leoben, avec 7 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.