Quartz Crystal Microbalance Coated with a Polyvinylpyrrolidone Microfiber Active Layer as a High-Performance Acetic Acid Gas Sensor
Rattachement africain : id, pl. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
Acetic acid is among the most common and damaging airborne contaminants. Exposure to acetic acid gas can irritate the nose and throat, which may harm human health. In light of the increasing use of acetic acid in industry, there is a critical need for an acetic acid detection device that can operate in real time with excellent performance. This study developed an acetic acid gas sensor using a quartz crystal microbalance (QCM) deposited with polyvinylpyrrolidone (PVP) microfiber by a well-recognized electrospinning method. Scanning electron microscopy (SEM) and Fourier-transform infrared (FTIR) spectroscopy were employed to observe the morphology and chemical composition of the fabricated microfibers. The obtained sensor has a high sensitivity of (4.144 ± 0.039) Hz·ppm –1 with a low detection limit and rapid response and recovery times of 75 and 66 s, respectively. In addition, the fabricated sensor also exhibits good performance as well as repeatability and long-term stability. Selectivity tests were also conducted for various analytes and exhibited excellent selectivity toward acetic acid. These advancements demonstrate that the PVP microfiber active layers not only address the challenges of detection by enhancing sensitivity but also provide unique mechanism selectivity for acetic acid molecules. However, advanced future research must still be conducted to improve the sensor reversibility, making the sensor more suitable for applications in a real environment.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Quartz Crystal Microbalance Coated with a Polyvinylpyrrolidone Microfiber Active Layer as a High-Performance Acetic Acid Gas Sensor
- Date Crossref
- 10/02/2025
- Éditeur
- American Chemical Society (ACS)
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Yogyakarta State University pays non établi dans la noticeUniversité ou école supérieure
-
Universitas Gadjah Mada pays non établi dans la noticeUniversité ou école supérieure
-
National Research and Innovation Agency pays non établi dans la noticeOrganisme public
-
Sumatera Institute of Technology pays non établi dans la noticeUniversité ou école supérieure
-
Green Chemistry pays non établi dans la noticeInstitution
-
Faculty of Mathematics and Natural Sciences Department of Physics Education pays non établi dans la noticeUniversité ou école supérieure
-
Universitas Negeri Yogyakarta pays non établi dans la noticeInstitution
-
Research Center for Food Technology and Processing pays non établi dans la noticeStructure de recherche
-
Center for Green and Sustainable Materials pays non établi dans la noticeInstitution
-
Department of Materials Engineering pays non établi dans la noticeInstitution
-
Institut Teknologi Sumatera Center for Green and Sustainable Materials pays non établi dans la noticeStructure de recherche
Yogyakarta State University, Universitas Gadjah Mada et National Research and Innovation Agency, avec 8 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.