Precipitation behavior of extruded AZ80 magnesium alloy subjected to minor tensile deformation
Rattachement africain : kr, cn. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
This study investigates the precipitation behavior of an extruded Mg–8Al–0.5Zn (AZ80) alloy subjected to 1.0% tensile deformation along the extrusion direction (ED) to examine the effects of minor slip-inducing deformation on precipitate formation and distribution during aging. The as-homogenized (AH) and pre-tensioned (PT) materials exhibit similar microstructures, including grain size and basal texture, except for a higher dislocation density in the PT material. It was hypothesized that the internal strain energy induced by pre-tension might influence continuous precipitate (CP) formation during aging. However, analysis of factors such as the Schmid factor, kernel average misorientation, and CP features (area fraction, density, and size) across 54 grains reveals no correlation among these variables. Instead, CP bands form unevenly in both AH and PT materials after aging, significantly impacting peak hardness and aging kinetics. These CP bands are not influenced by crystallographic orientation or internal strain energy but are attributed to the non-uniform distribution of Al solute atoms in the extrusion billet. The compositional inhomogeneity of the billet leads to discontinuous precipitate bands in the as-extruded material, which evolve into CP bands during the subsequent aging. Thus, small tensile deformation has minimal influence on precipitation behavior, which is predominantly determined by the inherent inhomogeneity of solute atoms in the billet.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Precipitation behavior of extruded AZ80 magnesium alloy subjected to minor tensile deformation
- Date Crossref
- 01/03/2025
- Éditeur
- Elsevier BV
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Kyungpook National University Department of Materials Science and Metallurgical Engineering pays non établi dans la noticeUniversité ou école supérieure
-
Hebei University of Technology pays non établi dans la noticeUniversité ou école supérieure
-
Agency for Defense Development pays non établi dans la noticeOrganisme public
-
Graduate School of Materials Science and Engineering pays non établi dans la noticeUniversité ou école supérieure
-
Missile Research Institute pays non établi dans la noticeStructure de recherche
Department of Materials Science and Metallurgical Engineering — Kyungpook National University, Hebei University of Technology et Agency for Defense Development, avec 2 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.