Comparative Analysis of Electrode Performance and Thermal Treatments in SMAW of Dissimilar Metal Joints
Rattachement africain : iq. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
AISI 316 stainless steel and ASTM A516 alloy steel weldment characteristics investigated according to filler materials and post weld heat treatment performance.The welding was performed using shielded metal arc welding (SMAW) with two types of filler metals, E7018 and E310, and PWHT was carried out at three temperatures: 600℃, 630℃, and 650℃.Welded joints' mechanical performance encompassed tensile and bending tests, and micro-hardness measurements, in addition to microstructural and fractographical examination employed for this purpose.Results evidenced that tensile strength and elongation of welded steel using E7018 electrode were 518 MPa and 28.1%, respectively, which showed relatively high strength.The results show steel welded with E310 electrode had higher mechanical properties, with the best balance between strength and ductility.In addition, post welding heat treatment improving mechanical properties by minimizing residual stress and refining grain structure.E7018 welded joints failure load increased to 86 KN after PWHT and the ultimate tensile strength increased to 525 MPa, further, microstructure analysis of optical microscope and scanning electron microscope shows PWHT has good effect on ductility improvement and hardness reduction.New microstructures with finer grain size and increased ferrite phase observed, which enhanced tensile and bend strength.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Comparative Analysis of Electrode Performance and Thermal Treatments in SMAW of Dissimilar Metal Joints
- Date Crossref
- 31/12/2024
- Éditeur
- International Information and Engineering Technology Association
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Nahrain University pays non établi dans la noticeUniversité ou école supérieure
-
Southern Technical University Amarah Technical Institute pays non établi dans la noticeUniversité ou école supérieure
-
University of Mosul pays non établi dans la noticeUniversité ou école supérieure
-
University of Samarra pays non établi dans la noticeUniversité ou école supérieure
-
Northern Technical University Power Mechanics Technology Department pays non établi dans la noticeUniversité ou école supérieure
-
College of Engineering Department of Mechanical Engineering pays non établi dans la noticeUniversité ou école supérieure
-
Al-Mustaqbal University College Department of Chemical Engineering and Petroleum Industries pays non établi dans la noticeUniversité ou école supérieure
Nahrain University, Amarah Technical Institute — Southern Technical University et University of Mosul, avec 4 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.