An Arginine-Doped Cathode Interlayer Enables Enhanced Efficiency in Organic Solar Cells

Résumé fourni par la source

The appearance of the cathode interlayer (CIL), a transition bridge between the cathode and the organic photoactive layer (OPL), provides a new pathway for the performance improvement of organic solar cells (OSCs). PFN-Br is widely employed in many optoelectronic devices, including nonfullerene OSCs, to transport electrons and improve charge injection at the interface. However, due to the relatively low conductivity of PFN-Br, the thickness of the CIL prepared with PFN-Br is usually less than 10 nm, which evidently contradicts the requirements for large-scale roll-to-roll manufacturing. Herein, a strategy using N -α-carbobenzyloxy- d -Arginine (NA) as the doping material is proposed to improve the performance of PFN-Br. The homogeneous distribution of NA in PFN-Br can modify the work function (WF) of PFN-Br and facilitate an interface dipole arrangement that is favorable for charge transfer, resulting in binary CILs with a tunable WF and increased conductivity. To verify this method, a series of devices were prepared with PBDB-T:IT-M or PM6:Y6 as the OPL and different proportions of NA in the CIL. The use of PFN-Br:NA (0.75:0.06, in weight%) in devices helps to improve the OPL morphology, making it exhibit a trend of fiber network structure, leading to a higher fill factor and short circuit current density. Consequently, the optimal power conversion efficiency (PCE) based on the PBDB-T:IT-M and PM6:Y6 is increased from 10.5% to 11.1% and from 15.4% to 16.0%, respectively. In addition, the NA-doped device exhibits better nitrogen stability after 360 h of dark storage compared to the control. The discovery of these modification approaches provides insight into the hybrid cathode interlayers required for efficient and reliable nonfullerene OSCs.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.