Aller au contenu principal
2024 article

Radial Dependences of the Phase Composition, Nanohardness, and Young’s Modulus for Ti–2 wt % Fe Alloy after High-Pressure Torsion

1Citations signalées, ce qui n’est pas une note de qualité
5Institutions déclarées
3Pays d’affiliation déclarés

Rattachement africain : ru, fr, pl. Niveau de preuve : code pays fourni par la source.

Le résumé fourni par la source

The specimens of Ti–2 wt % Fe alloy were annealed at three different temperatures, in the β-Ti, α-Ti + β-Ti and α-Ti + TiFe fields of the Ti–Fe phase diagram, then water quenched and subjected to high-pressure torsion (HPT). The X-ray diffraction analysis showed that the main phase in all annealed specimens was the α phase (more than 90%), while the main phase after HPT was the ω phase. Hardness H and Young’s modulus E were determined by nanoindentation at the center, in the middle of the radius, and near the edge of each specimen. It was found that the H and E values were different for specimens annealed at different temperatures and depended on the radial coordinate of the indentation region. The maximum H values were obtained in the middle of the radius of the specimens. The E values of all specimens decreased from the center to the edge, reaching very low values. The paper discusses structure transformations during HPT, the behavior of the radial dependences of H and E, and probable causes of a strong decrease in E values.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.

Le contrôle bibliographique ouvert

DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.

Titre Crossref
Radial Dependences of the Phase Composition, Nanohardness, and Young’s Modulus for Ti–2 wt % Fe Alloy after High-Pressure Torsion
Date Crossref
01/12/2024
Éditeur
Pleiades Publishing Ltd
Type
journal-article

Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.

Où se fait cette recherche

  • Osipyan Institute of Solid State Physics RAS pays non établi dans la notice
    Structure de recherche
  • Tambov State University Research Institute of Nanotechnology and Nanomaterials pays non établi dans la notice
    Université ou école supérieure
  • Université Sorbonne Paris Nord pays non établi dans la notice
    Université ou école supérieure
  • Institute of Metallurgy and Materials Science pays non établi dans la notice
    Structure de recherche
  • Polish Academy of Sciences pays non établi dans la notice
    Organisme public
  • Sorbonne Paris Nord University Process and Materials Science Laboratory pays non établi dans la notice
    Université ou école supérieure

Osipyan Institute of Solid State Physics RAS, Research Institute of Nanotechnology and Nanomaterials — Tambov State University et Université Sorbonne Paris Nord, avec 3 autres affiliations.

Une affiliation ne permet pas de déduire la nationalité d’un auteur.

Les sujets associés

Metal and Thin Film MechanicsMicrostructure and mechanical propertiesIntermetallics and Advanced Alloy Properties

BNTIC News n’est pas le producteur de ces données. Les publications sont interrogées à la demande dans Crossref, OpenAIRE, DOAJ, Europe PMC, HAL, DataCite, AfricArXiv, ROR et la Banque mondiale, sans clé d’accès. OpenAlex reste optionnel. Aucun service payant n’est nécessaire et aucune donnée externe n’est enregistrée en base. Consulter les sources et leurs limites.