SURFACE DEGRADATION OF TUNGSTEN FOR PLASMA-FACING COMPONENTS AFTER THERMAL LOADING
Rattachement africain : cz. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
During the operation of fusion devices, plasma facing components (PFCs) are subjected to high thermal loads.These result in mechanical stresses and various forms of degradation and microstructural changes in the material volume.In order to assess the viability of the PFC candidate materials, tungsten samples were subjected to high heat flux tests simulating heat load pulses caused by plasma instabilities.The presented study includes also a thermal model developed in ANSYS Fluent software to simulate the temperature profile at different depths of the sample and its evolution during the tests.Thermal loading was performed using an electron beam facility.Short pulses (~1 s) of up to 40 MW/m 2 thermal load were applied to the top surface of 10 mm wide cylindrical samples.Homogeneous heat flux distribution over the circular area was achieved by scanning the electron beam in a dense pattern.The temperature evolution during the tests was monitored using a thermocouple inserted into the sample along with the surface temperature measurement with a pyrometer.Scanning electron microscopy was used to document surface degradation.A dense net of intergranular cracks typically formed on the loaded surface of the studied material.As a result of a qualitative comparison of the measured temperature profiles during the experiments with the profiles issued from ANSYS simulations, the computational thermal model was verified.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- SURFACE DEGRADATION OF TUNGSTEN FOR PLASMA-FACING COMPONENTS AFTER THERMAL LOADING
- Date Crossref
- 01/01/2024
- Éditeur
- TANGER Ltd.
- Type
- proceedings-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Research Centre Rez pays non établi dans la noticeStructure de recherche
-
Czech Academy of Sciences pays non établi dans la noticeStructure de recherche
-
Ujp Praha (Czechia) pays non établi dans la noticeEntreprise
-
Brno University of Technology pays non établi dans la noticeUniversité ou école supérieure
-
UJP PRAHA a.s. pays non établi dans la noticeInstitution
-
Faculty of Mechanical Engineering pays non établi dans la noticeUniversité ou école supérieure
Research Centre Rez, Czech Academy of Sciences et Ujp Praha (Czechia), avec 3 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.