Aller au contenu principal
Accès ouvert déclaré 2024 preprint

Chirped pulse waveguide amplifier

0Citations signalées — pas une note de qualité
0Institutions déclarées
0Pays d’affiliation déclarés

Résumé fourni par la source

Cr:ZnS and Cr:ZnSe lasers – truly named by the inventor a “Ti:sapphire of the infrared” - have underpinned advances in ultrafast lasers, in many respects outperforming Ti:sapphire. Recently, even single optical cycle pulses with outstanding pulse-to-pulse stability in amplitude and phase, as well as multi-octave frequency combs covering the whole near- and mid-IR wavelength range between 1 and 18 microns became a reality in bulk format. The current trend in photonics goes towards integration and the first steps have been recently made towards integration of a first Ti:sapphire waveguide amplifier on insulator. Cr:ZnS laser is perfectly compatible with silicon photonics though and as such presents a particular interest as a laser in waveguide format. We introduce the first 34-mm long truly waveguide large cross-section (up to 50 μm) broadband ultrafast Cr:ZnS crystalline amplifier with remarkably high spatial output beam quality and M² factor of 1.13x1.25 (in vertical and horizontal planes, respectively) which is close to fundamental Gaussian mode spatial quality. The depressed-cladding buried waveguide is produced by an ultrafast laser writing procedure in a single pulse modification mode with a nonlinear defect formation mechanism, which allows a high degree of flexibility in fabrication when the geometry, size, and even refractive index can be modified along the waveguide. A designed numerical model that includes both pump and pulse propagation allows calculation and optimization of the waveguide design. In a chirped pulse amplifier (CPA) arrangement with a volume Bragg grating-based stretcher/compressor the amplifier provides a high gain of 5.5 dB/cm and 2.35 W of average output power, while the amplified pulse compression down to 204 fs assuming Sech² temporal shape is demonstrated. Remarkably, we demonstrate that a truly waveguide geometry with a non-centrosymmetric active medium like Cr:ZnS generates multiple harmonics even at moderate pulse energies, making an integrated CEP-stabilization feasible. Such frequency comb sources, combined with the CEP-controlled coherent spectra from visible to the mid-IR in an integrated Si-compatible format will further revolutionize fundamental science and will open new horizons in quantum technologies, environmental sensing, optogenetics and bio-medical applications.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.

Contrôle bibliographique ouvert

DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.

Titre Crossref
Chirped pulse waveguide amplifier
Date Crossref
27/11/2024
Éditeur
Optica Publishing Group
Type
posted-content

Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude et ne compte pas comme une seconde source scientifique indépendante.

Sujets associés

Gyrotron and Vacuum Electronics ResearchLaser Design and ApplicationsParticle accelerators and beam dynamics

BNTIC News n’est pas le producteur de ces données. Recherche à la demande dans Crossref et Europe PMC, sans clé ; OpenAlex reste optionnel. Aucun service payant requis, aucune réponse conservée. Sources et limites.