The Analysis of the Thermal Processes Occurring in the Contacts of Vacuum Switches During the Conduction of Short-Circuit Currents

Résumé fourni par la source

This article presents the results of research on the thermal state of vacuum switch contacts during the conduction of short-circuit currents. This state is directly related to the value of the flowing current and the operating conditions of the switch. These conditions are mildest in the case of the conduction of operating currents through closed contacts. The situation worsens significantly when short-circuit currents are conducted, and the greatest destructive effects occur during commutation processes. Exceeding a certain level of contact destruction usually leads to the loss of the switching capacity of the switch. In vacuum switches, tracking the thermal state of the contacts is particularly difficult due to the inaccessibility of transducers or measurement sensors inside the chamber. In such a case, simulation studies verified by experimental results are important. This paper presents the results of such studies, directed at their practical implementation in the design and operation of vacuum switches. Simulation studies were conducted to analyze the thermal processes occurring in the contacts of vacuum switches during the conduction of short-circuit currents. Special attention was paid to the influence of contact parameters on the thermal processes occurring during the conduction of short-circuit currents. In addition to simulations, experimental studies were carried out to verify the simulation results. Ultimately, the research results presented are intended to provide practical knowledge of the design and operation of vacuum switches, particularly with regard to the contact heating processes during the conduction of short-circuit currents.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.