Optimization of Al6061 Nanocomposites Production Reinforced with Multiwalled Carbon Nanotubes
Rattachement africain : pt. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
This study investigates the impact of multi-walled carbon nanotubes (MWCNTs) on the microstructure and mechanical properties of Al6061 nanocomposites. The MWCNTs were uniformly dispersed in the aluminum alloy matrix using ultrasonication following cold pressing and sintering in a vacuum. The effect of the sintered temperature on the microstructure and mechanical properties of the nanocomposites was evaluated. The addition of MWCNTs resulted in grain refinement, with the nanocomposites exhibiting smaller and more uniformly distributed grains than the pure Al6061 matrix, particularly at lower sintering temperatures of 580 and 600 °C. The nanocomposites also demonstrated an increase in hardness, with peak values observed at 580 °C, primarily due to the effective dispersion of MWCNTs, which restrict dislocation movement and reinforce grain boundaries. While higher sintering temperatures led to significant grain growth and less uniform hardness distribution, lower temperatures favored finer grain structures and more homogeneous hardness profiles. The results suggest that the optimal sintering temperature for achieving the best balance between microstructure and mechanical properties is 580 °C. However, the study also highlights the need for optimized dispersion techniques to achieve a more uniform distribution of MWCNTs.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Optimization of Al6061 Nanocomposites Production Reinforced with Multiwalled Carbon Nanotubes
- Date Crossref
- 23/09/2024
- Éditeur
- MDPI AG
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Universidade do Porto pays non établi dans la noticeUniversité ou école supérieure
-
Institute of Mechanical Engineering and Industrial Mangement pays non établi dans la noticeStructure de recherche
-
Laboratório Associado de Energia pays non établi dans la noticeStructure de recherche
-
Associated Laboratory of Energy pays non établi dans la noticeStructure de recherche
-
Faculty of Engineering Department of Metallurgical and Materials Engineering pays non établi dans la noticeUniversité ou école supérieure
Universidade do Porto, Institute of Mechanical Engineering and Industrial Mangement et Laboratório Associado de Energia, avec 2 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.