Hysteretic performance of high-strength steel square hollow section T joints considering fracture behavior

Le résumé fourni par la source

The performance of high-strength steel (HSS) welding joints is crucial for tubular structure design. This paper investigates the hysteretic performance of HSS square hollow section (SHS) T joints considering fracture behaviors. The hysteresis and tensile tests of the HSS SHS T joints and a comparative analysis of failure modes and bearing capacity are conducted. Parameter analysis is conducted based on the validated FE model considering fracture and elastoplastic constitutive relationship with a wide range of parameters covered, including the cross-sectional width ratio and the wall thickness ratio between brace and chord, and the width-thickness ratio of the chord, and the seam weld size of the joint connection. The results show that fracture behavior can affect the failure mode and bearing capacity of the joints, and it cannot be ignored in the hysteresis analysis process. The energy consumption capacity and the ductility coefficients increase when β increases from 0.2 to 1.0, τ increases from 0.3 to 1.0 and 2 γ decreases from 40 to 20. Meanwhile, joints’ failure modes and residual strength vary with the above parameters. It is necessary to use the damage fracture constitutive model of steel in numerical simulation.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.