Preparation and Electrochemical Properties of High Specific Surface Carbon Aerogel/SnO2 Anode Materials for Li-Ion Batteries
Rattachement africain : cn. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
Lithium-ion batteries have consistently been a focal point of research in the field of energy. Traditional graphite anodes no longer meet the increasing demands for energy density. SnO2, with its high theoretical capacity, environmental friendliness, and safety, has emerged as a promising anode material for the next generation. However, issues such as volumetric expansion and agglomeration during charge–discharge cycles hinder its practical application. Addressing these challenges, this paper combines the high capacity of SnO2 with conductive and highly porous carbon aerogels, comparing the performance differences between composite anodes prepared by vacuum impregnation and hydrothermal methods. The results show the following: (1) high specific surface area carbon aerogels are beneficial for enhancing performance; (2) vacuum impregnation yields relatively higher initial capacity and better cycle stability; and (3) hydrothermal synthesis results in a higher loading of SnO2.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé, mais le titre doit être comparé manuellement.
- Titre Crossref
- Preparation and Electrochemical Properties of High Specific Surface Carbon Aerogel/SnO<sub>2</sub> Anode Materials for Li-Ion Batteries
- Date Crossref
- 08/10/2024
- Éditeur
- World Scientific Pub Co Pte Ltd
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Xiangtan University pays non établi dans la noticeUniversité ou école supérieure
-
School of Materials Science and Engineering National-Provincial Laboratory of Special Function Thin Film Materials pays non établi dans la noticeUniversité ou école supérieure
-
School of Mechanical Engineering and Mechanics pays non établi dans la noticeUniversité ou école supérieure
-
School of Physics and Optoelectronics Engineering pays non établi dans la noticeUniversité ou école supérieure
Xiangtan University, National-Provincial Laboratory of Special Function Thin Film Materials — School of Materials Science and Engineering et School of Mechanical Engineering and Mechanics, avec 1 autre affiliation.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.