Brazing of TC4 Alloy Using Ti-Zr-Ni-Cu-Sn Amorphous Braze Fillers
Rattachement africain : cn. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
In order to address the issues of excessive brittle intermetallic compounds (IMC) formation in the TC4 brazed joints, two types of novel Ti-Zr-Cu-Ni-Sn amorphous braze fillers were designed. The microstructure and shear strength of the TC4/Ti-Zr-Ni-Cu-Sn/TC4 brazed joints were studied by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffractometer (XRD) and electronic universal materials testing machine. The results show that the optimized Ti35Zr25Ni15Cu20Sn5 braze filler whose chemical composition is closer to the eutectic point possesses a lower melting point compared with the equiatomic Ti23.75Zr23.75Ni23.75Cu23.75Sn5. This was beneficial to the sufficient diffusion of Cu and Ni elements with the base metal during brazing and reduces the residual (Ti,Zr)2(Ni,Cu) content in the joint, which helps to improve the joint performance. The room-temperature and high-temperature shear strength of the TC4 brazed joints using the near eutectic component Ti35Zr25Ni15Cu20Sn5 filler reached a maximum of 472 MPa and 389 MPa at 970 °C/10 min, which was 66% and 48% higher than that of the TC4 joints brazed with the equiatomic Ti23.75Zr23.75Ni23.75Cu23.75Sn5 braze filler. Microstructural evolution and the corresponding mechanical response were in-depth discussed.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Brazing of TC4 Alloy Using Ti-Zr-Ni-Cu-Sn Amorphous Braze Fillers
- Date Crossref
- 29/07/2024
- Éditeur
- MDPI AG
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Harbin Welding Institute pays non établi dans la noticeStructure de recherche
-
Zhengzhou Institute of Machinery pays non établi dans la noticeStructure de recherche
-
State Key Laboratory of Advanced Brazing Filler Metals and Technology pays non établi dans la noticeStructure de recherche
-
State Key Laboratory of Precision Welding & Joining of Materials and Structures pays non établi dans la noticeStructure de recherche
-
State Key Laboratory of Advanced Brazing Filler Metals & Technology pays non établi dans la noticeStructure de recherche
Harbin Welding Institute, Zhengzhou Institute of Machinery et State Key Laboratory of Advanced Brazing Filler Metals and Technology, avec 2 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.