A Tunable Two-Stage Bandpass Filter Incorporating Two Electromagnetically Coupled Curved Beams
Rattachement africain : cn, fr. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
The snap through phenomenon of curved beam structures offers the possibility for designing high-performance filters, however, superharmonic resonances outside the filter’s passband are difficult to be attenuated. Therefore, a two-stage bandpass filter incorporating two electromagnetically coupled curved microbeams is designed, which possesses excellent specifications of sharp switching in the stopband and flat bandwidth compared to single curved-beam based filter. The reduced-order model considering the nonlinear electromagnetic forces and geometric nonlinearities is established, and discretized using the Galerkin method. Then, the resulting static and dynamic reduced order models are numerically solved. Extensive numerical simulation results show that the improved filter has a rectangular coefficient close to 1.0, a passband ripple of 0.2 dB, and a bandwidth ratio of 14.8%, which drastically reduces the stopband interference to 10% of the passband signal. Finally, the effects of DC voltage, AC voltage and coupling strength on the center frequency and bandwidth are parametrically investigated, where the center frequency can be tuned between 23.81 kHz and 25.16 kHz and the bandwidth covers the frequency range from 22.46 kHz to 26.05 kHz. [2024-0054]
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- A Tunable Two-Stage Bandpass Filter Incorporating Two Electromagnetically Coupled Curved Beams
- Date Crossref
- 01/08/2024
- Éditeur
- Institute of Electrical and Electronics Engineers (IEEE)
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Dalian University of Technology State Key Laboratory of Structural Analysis for Industrial Equipment pays non établi dans la noticeUniversité ou école supérieure
-
Centre National de la Recherche Scientifique pays non établi dans la noticeOrganisme public
-
Franche-Comté Électronique Mécanique Thermique et Optique - Sciences et Technologies pays non établi dans la noticeStructure de recherche
-
Inner Mongolia University Institute of Transportation pays non établi dans la noticeUniversité ou école supérieure
-
University of Franche-Comté Department of Applied Mechanics pays non établi dans la noticeUniversité ou école supérieure
State Key Laboratory of Structural Analysis for Industrial Equipment — Dalian University of Technology, Centre National de la Recherche Scientifique et Franche-Comté Électronique Mécanique Thermique et Optique - Sciences et Technologies, avec 2 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.