Cryogenic tensile behavior of carbon-doped CoCrFeMnNi high-entropy alloys additively manufactured by laser powder bed fusion
Rattachement africain : kr, jp. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
Cryogenic tensile behaviors of carbon-doped CoCrFeMnNi high-entropy alloy (C-HEA) printed by laser powder bed fusion (LPBF) were systematically explored. The LPBFed C-HEA exhibits excellent cryogenic tensile properties with not only high yield strength but also largely extended elongation as compared to those under room temperature deformation. In particular, the elongation of the C-HEA is twice as high at 77 K compared to 298 K. The strain hardening rate of LPBFed C-HEA under cryogenic deformation is much higher than that under plastic deformation at the room temperature, which contributes to the dramatic enhancement of uniform elongation by delaying plastic instability. Because the flow stress of C-HEA is significantly increased by temperature decrease, it can exceed the critical twinning stress at the early-stage deformation at 77 K. Deformation twins and nano-carbides synergistically contribute to the high back stress evolution of the C-HEA under cryogenic tensile deformation. This study can provide a new perspective on developing high-performance alloys for use in additive manufacturing in cryogenic applications.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Cryogenic tensile behavior of carbon-doped CoCrFeMnNi high-entropy alloys additively manufactured by laser powder bed fusion
- Date Crossref
- 01/04/2024
- Éditeur
- Elsevier BV
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Gyeongsang National University Department of Materials Engineering and Convergence Technology (Center for K-Metals) pays non établi dans la noticeUniversité ou école supérieure
-
Korea Institute of Materials Science Department of 3D Printing Materials pays non établi dans la noticeUniversité ou école supérieure
-
Pohang University of Science and Technology Department of Materials Science and Engineering pays non établi dans la noticeUniversité ou école supérieure
-
Kookmin University Department of Materials Science and Engineering pays non établi dans la noticeUniversité ou école supérieure
-
Yonsei University Institute for Convergence Research and Education in Advanced Technology pays non établi dans la noticeUniversité ou école supérieure
-
Tohoku University Advanced Institute for Materials Research (WPI-AIMR) pays non établi dans la noticeUniversité ou école supérieure
-
Advanced Institute of Materials Science pays non établi dans la noticeStructure de recherche
-
Advanced Institute of Convergence Technology pays non établi dans la noticeStructure de recherche
Department of Materials Engineering and Convergence Technology (Center for K-Metals) — Gyeongsang National University, Department of 3D Printing Materials — Korea Institute of Materials Science et Department of Materials Science and Engineering — Pohang University of Science and Technology, avec 5 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.