Continuous glucose monitoring using wearable non-enzymatic sensors in a physiological environment
Rattachement africain : ir. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
A novel non-enzymatic sensor has been developed for continuous glucose measurement in physiological body fluids using a Step-wise; amperometric method. Unlike; traditional nickel-based catalysts, this sensor overcomes challenges in biological and neutral pH environments. It utilizes a carbon fiber microelectrode modified with gold and nickel nanoparticles, reinforced by a biopolymer layer derived from quince seed mucilage (QSM). By applying a negative pretreatment potential step, hydroxide ions are locally generated, creating a partially alkaline environment that activates the nickel nanoparticles. Glucose concentration is determined by measuring the current at the electrocatalytic potential of nickel, which directly oxidizes glucose. To clean and reactivate the sensor, a positive pulse potential step is applied at the end of each cycle. The sensor exhibits high sensitivity (13.8 μA.mM−1.mm−2) and a low limit of detection (11.3 μM) in neutral pH (7.4). These results demonstrate the promising performance of the sensor for continuous glucose measurement in physiological body fluids. Using eco-friendly and biocompatible QSM as a reinforcing layer enhances its potential for biomedical applications. Additionally, a wearable compact electronic module was designed and fabricated to apply the potential, read the sensor's output currents, and monitor and record the results. The module's performance in measuring glucose in blood plasma is comparable to that of a commercial glucometer.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Continuous glucose monitoring using wearable non-enzymatic sensors in a physiological environment
- Date Crossref
- 01/06/2024
- Éditeur
- Elsevier BV
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Chemistry and Chemical Engineering Research Center of Iran pays non établi dans la noticeStructure de recherche
-
Tabriz University of Medical Sciences Biotechnology Research Center pays non établi dans la noticeUniversité ou école supérieure
-
Biotechnology Research Center pays non établi dans la noticeStructure de recherche
-
Shahid Beheshti University of Medical Sciences pays non établi dans la noticeUniversité ou école supérieure
-
Institute for Advanced Studies in Basic Sciences Department of Chemistry pays non établi dans la noticeUniversité ou école supérieure
-
Faculty of Clean Technologies pays non établi dans la noticeUniversité ou école supérieure
-
Tehran pays non établi dans la noticeInstitution
-
School of Medicine Department of Medical Physics and Biomedical Engineering pays non établi dans la noticeUniversité ou école supérieure
Chemistry and Chemical Engineering Research Center of Iran, Biotechnology Research Center — Tabriz University of Medical Sciences et Biotechnology Research Center, avec 5 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.