Aller au contenu principal
Accès ouvert déclaré 2024 article

Non-destructive depth reconstruction of Al-Al2Cu layer structure with nanometer resolution using extreme ultraviolet coherence tomography

6Citations signalées, ce qui n’est pas une note de qualité
8Institutions déclarées
1Pays d’affiliation déclarés

Rattachement africain : de. Niveau de preuve : code pays fourni par la source.

Le résumé fourni par la source

Non-destructive cross-sectional characterization of materials systems with a resolution in the nanometer range and the ability to allow for time-resolved in-situ studies is of great importance in material science. Here, we present such a measurements method, extreme ultraviolet coherence tomography (XCT). The method is non-destructive during sample preparation as well as during the measurement, which is distinguished by a negligible thermal load as compared to electron microscopy methods. Laser-generated radiation in the extreme ultraviolet (XUV) and soft x-ray range is used for characterization. The measurement principle is interferometric and the signal evaluation is performed via an iterative Fourier analysis. The method is demonstrated on the metallic material system Al-Al2Cu and compared to electron and atomic force microscopy measurements. We also present advanced reconstruction methods for XCT, which even allow for the determination of the roughness of outer and inner interfaces.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.

Le contrôle bibliographique ouvert

DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.

Titre Crossref
Non-destructive depth reconstruction of Al-Al2Cu layer structure with nanometer resolution using extreme ultraviolet coherence tomography
Date Crossref
01/05/2024
Éditeur
Elsevier BV
Type
journal-article

Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.

Où se fait cette recherche

  • Friedrich Schiller University Jena pays non établi dans la notice
    Université ou école supérieure
  • Schott (Germany) pays non établi dans la notice
    Entreprise
  • Chemnitz University of Technology pays non établi dans la notice
    Université ou école supérieure
  • Helmholtz Institute Jena pays non établi dans la notice
    Structure de recherche
  • Electro Optical Systems (Germany) pays non établi dans la notice
    Entreprise
  • Fraunhofer Institute for Applied Optics and Precision Engineering pays non établi dans la notice
    Structure de recherche
  • Leibniz Institute of Photonic Technology pays non établi dans la notice
    Structure de recherche
  • Hochschule Mittweida pays non établi dans la notice
    Université ou école supérieure
  • Indigo Optical Systems GmbH pays non établi dans la notice
    Entreprise
  • University of Applied Sciences Mittweida pays non établi dans la notice
    Université ou école supérieure

Friedrich Schiller University Jena, Schott (Germany) et Chemnitz University of Technology, avec 7 autres affiliations.

Une affiliation ne permet pas de déduire la nationalité d’un auteur.

Les sujets associés

Integrated Circuits and Semiconductor Failure AnalysisLaser Material Processing TechniquesNear-Field Optical Microscopy

BNTIC News n’est pas le producteur de ces données. Les publications sont interrogées à la demande dans Crossref, OpenAIRE, DOAJ, Europe PMC, HAL, DataCite, AfricArXiv, ROR et la Banque mondiale, sans clé d’accès. OpenAlex reste optionnel. Aucun service payant n’est nécessaire et aucune donnée externe n’est enregistrée en base. Consulter les sources et leurs limites.