Stiffness design, failure modes, and lightweight design of truss-lattice with filler sandwich plate under thermal loading
Rattachement africain : cn. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
A homogeneous stiffness equation of a lattice with a filler has been obtained by the conservation of strain energy. Using this equation, the relationships between the physical and geometric factors of the truss, filler, and homogeneous stiffness were derived, and stiffness design criteria were obtained. The relationships between different thermal failure modes of the truss-lattice with the filler sandwich plate and its physical and geometric parameters were discussed, including their effects on global plate buckling, local plate buckling, truss buckling, and yielding. Strength improvement measures have been obtained. Failure maps with three geometric ratios and different physical ratios were obtained by failure mode analysis. Finally, a lightweight design method that achieves the strength and stiffness requirements was obtained based on four independent variables.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Stiffness design, failure modes, and lightweight design of truss-lattice with filler sandwich plate under thermal loading
- Date Crossref
- 12/03/2024
- Éditeur
- Informa UK Limited
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Chinese Academy of Sciences pays non établi dans la noticeOrganisme public
-
Institute of Mechanics pays non établi dans la noticeStructure de recherche
-
University of Chinese Academy of Sciences pays non établi dans la noticeUniversité ou école supérieure
-
Key Laboratory for Mechanics in Fluid-Solid Coupling Systems pays non établi dans la noticeStructure de recherche
-
School of Engineering Sciences pays non établi dans la noticeUniversité ou école supérieure
Chinese Academy of Sciences, Institute of Mechanics et University of Chinese Academy of Sciences, avec 2 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.