Physical and mechanical properties of nano-modified polybenzoxazine nanocomposite laminates: Pre-flight tests before exposure to low Earth orbit

Résumé fourni par la source

Polybenzoxazine (PBZ) formulations based on commercial components and modified with polyhedral oligomeric silsesquioxanes (POSS, 5 wt.% and 10 wt.%) have been scaled up for industrialisation, and their processing characteristics determined using thermal analysis and rheometry. The ultimate glass transition temperatures for the cured PBZ resins are increased by catalysis and by the incorporation of POSS. Carbon fibre reinforced polymer (CFRP) laminates (500 mm × 500 mm x 3 mm) were manufactured using resin transfer moulding and subjected to a suite of mechanical tests. The addition of 5 wt.% POSS to the PBZ formulation leads to substantial improvements in both strength (tensile, flexural, short beam shear, and compression) and modulus (tensile, flexural, and compression). The CFRP specimens were subjected to a suite of pre-flight qualification tests prior to deployment in low Earth orbit. When the CFRP laminates were exposed to <1 × 10−5 mbar and 125 °C, the total mass loss recorded for each sample was <1 wt.%. The introduction of POSS at both levels of incorporation improves erosion yield following exposure to high atomic oxygen flux and the ratio of solar absorptance (α) to emittance (ε) remained constant following simulated solar exposure. The outcome was that the three PBZ CFRP samples passed their pre-flight tests.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.