Dependence of microstructure and properties in additive manufactured 18Ni300 on heat treatment and surface enhancement
Rattachement africain : cn. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
Selective laser melting (SLM) known as a rapid manufacturing technology can fabricate complex and dense metallic components of 18Ni300 with excellent properties. The performance of 18Ni300 can be improved by intermetallics using heat treatment, not including anti-corrosion property. In this study, the effects of heat and coating treatments on microstructure and properties of 18Ni300 fabricated by SLM were investigated. The characterization results indicated that grain coarsening, dislocation reduction, and texture strengthening occurred after the optimal heat treatment. The sequential processing of 820 °C for 2 h and 480 °C for 3 h can maximize the microhardness (increased by 74 %) and ultimate tensile strength (increased by 79 %), accompanying cost of Charpy impact (reduced by 43 %) and elongation (decreased by 32 %). However, excessively high or low aging temperature and time can lead to insufficient performance improvement because of austenite reversal. In addition, the great interface bonding is observed after the laser cladding coating treatment, and the wear resistance maintains well while improving the anti-corrosion property significantly with low quality loss.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Dependence of microstructure and properties in additive manufactured 18Ni300 on heat treatment and surface enhancement
- Date Crossref
- 01/03/2024
- Éditeur
- Elsevier BV
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Jiangnan University pays non établi dans la noticeUniversité ou école supérieure
-
Chinese Academy of Sciences pays non établi dans la noticeOrganisme public
-
Institute of High Energy Physics pays non établi dans la noticeStructure de recherche
-
State Key Laboratory of Food Science and Technology pays non établi dans la noticeStructure de recherche
-
MEMS RIGHT (China) pays non établi dans la noticeEntreprise
-
Jiangsu Province Special Equipment Safety Supervision and Inspection Institute pays non établi dans la noticeInstitution
-
Jiangsu Key Laboratory of Advanced Food Manufacturing Equipment and Technology pays non établi dans la noticeStructure de recherche
-
Jiangsu Province Engineering Research Center of Micro-Nano Additive and Subtractive Manufacturing pays non établi dans la noticeStructure de recherche
-
School of Mechanical Engineering pays non établi dans la noticeUniversité ou école supérieure
-
Special Equipment Safety Supervision Inspection Institute of Jiangsu Province pays non établi dans la noticeStructure de recherche
-
Ltd Wuxi EL PONT Radiation Technology Co. pays non établi dans la noticeEntreprise
-
Shandong Province Zhangqiu Blower Co. pays non établi dans la noticeOrganisation à but non lucratif
Jiangnan University, Chinese Academy of Sciences et Institute of High Energy Physics, avec 9 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.