Green Application of Isolated Colorant from Neem Bark for Mordant-Coated Wool: Optimization of Dyeing and Mordanting for Shade Development
Rattachement africain : pk, tr. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
This study aimed to assess the effectiveness of utilizing a tannin-based natural brown colorant from neem bark for dyeing wool under microwave treatment, specifically evaluating its coloring efficiency. The colorant was extracted in a methanol solution that had been acidified both before and after being subjected to microwave treatment for up to 6 min. The dyeing variables were optimized to create new shades of dye with desirable fastness properties, and sustainable chemical and bio-mordants ranging from 1 to 10 g/100 mL were employed. Through experimentation, it was determined that when an unirradiated acidic methanolic extract (AME) with a salt concentration of 3 g/100 mL was applied onto wool fabric (RWF) and subjected to microwave treatment for 4 min, it resulted in a high color yield. This was achieved by heating the solution to 65 °C and allowing it to remain in contact with the fabric for a duration of 65 min. Favorable color characteristics were achieved when utilizing a pre-chemical mordant of 5% Fe and a post-chemical mordant of 5% Fe. In contrast, the utilization of 7% henna as a pre-bio-mordant in combination with 3% turmeric extract as a meta-bio-mordant resulted in favorable color characteristics. The study concludes that microwave treatment exhibits outstanding sustainable efficacy in isolating colorants from neem bark powder for wool dyeing. Incorporating bio-mordants further enhanced the process’s sustainability and eco-friendliness.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Green Application of Isolated Colorant from Neem Bark for Mordant-Coated Wool: Optimization of Dyeing and Mordanting for Shade Development
- Date Crossref
- 18/09/2023
- Éditeur
- MDPI AG
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Government College University Department of Applied Chemistry pays non établi dans la noticeUniversité ou école supérieure
-
Riphah International University Department of Chemistry pays non établi dans la noticeUniversité ou école supérieure
-
University of Faisalabad pays non établi dans la noticeUniversité ou école supérieure
-
Necmettin Erbakan University pays non établi dans la noticeUniversité ou école supérieure
-
Akdeniz University pays non établi dans la noticeUniversité ou école supérieure
-
Istanbul University-Cerrahpaşa pays non établi dans la noticeUniversité ou école supérieure
-
Marmara University Department of Textile Engineering pays non établi dans la noticeUniversité ou école supérieure
-
Niğde Ömer Halisdemir Üniversitesi pays non établi dans la noticeUniversité ou école supérieure
-
Atatürk University pays non établi dans la noticeUniversité ou école supérieure
-
University of Peshawar pays non établi dans la noticeUniversité ou école supérieure
-
Faculty of Fine Arts and Architecture Department of Graphics pays non établi dans la noticeUniversité ou école supérieure
-
Vocational School of Technical Sciences pays non établi dans la noticeUniversité ou école supérieure
Department of Applied Chemistry — Government College University, Department of Chemistry — Riphah International University et University of Faisalabad, avec 9 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.