Aller au contenu principal
Accès ouvert déclaré 2023 article

Fatigue Behaviour of CFRP Bar-Reinforced Seawater Sea Sand Concrete Beams: Deformation Analysis and Prediction

5Citations signalées, ce qui n’est pas une note de qualité
2Institutions déclarées
1Pays d’affiliation déclarés

Rattachement africain : cn. Niveau de preuve : code pays fourni par la source.

Le résumé fourni par la source

The new composite application of seawater sea sand concrete (SSC) and fibre-reinforced polymer (FRP) bars had broad development prospects. In this paper, the load levels and stirrup spacing were the main research parameters. The fatigue behaviour of carbon fibre-reinforced polymer (CFRP) bar-reinforced SSC beams was studied by four-point bending tests, and the development laws of fatigue crack width and fatigue deflection were deeply discussed. Results revealed that excessive stirrup spacing might change static failure modes of CFRP bar-reinforced SSC beams, resulting in a reduction in mechanical behaviour. This paper preliminarily suggested that the maximum stirrup spacing should be 200 mm. The fatigue failure mode of CFRP bar-reinforced SSC beams in this paper was mainly shear fatigue failure. The fatigue crack width and fatigue deflection increased with the cycle number. When the cycle number reached 80% of fatigue life, the fatigue crack width increased by about 100%. When the beam specimens were close to fatigue failure, the increase in fatigue deflection ranged from 166.5% to 188.9%. Load levels had a significant impact on fatigue life, and a fatigue limit of 0.5 was proposed as a threshold. In addition, the larger the stirrup spacing, the greater the growth rate of fatigue crack width and fatigue deflection. Therefore, based on the calculation equation for the maximum crack width in the code, the influence of stirrup spacing, load levels and n/N was further considered in this paper. Considering the influence of stirrup spacing and load levels, a calculation equation for fatigue deflection was proposed. Finally, the fatigue design concept was improved, and the fatigue life was further subdivided into the fatigue life on bearing capacity and normal service.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.

Le contrôle bibliographique ouvert

DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.

Titre Crossref
Fatigue Behaviour of CFRP Bar-Reinforced Seawater Sea Sand Concrete Beams: Deformation Analysis and Prediction
Date Crossref
07/09/2023
Éditeur
MDPI AG
Type
journal-article

Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.

Où se fait cette recherche

  • Guangdong University of Technology pays non établi dans la notice
    Université ou école supérieure
  • Guangzhou Building Materials Institute pays non établi dans la notice
    Structure de recherche
  • Guangdong Wengu Testing and Identification Co. pays non établi dans la notice
    Organisation à but non lucratif
  • School of Civil and Transportation Engineering pays non établi dans la notice
    Université ou école supérieure
  • Guangzhou City Construction College pays non établi dans la notice
    Université ou école supérieure

Guangdong University of Technology, Guangzhou Building Materials Institute et Guangdong Wengu Testing and Identification Co., avec 2 autres affiliations.

Une affiliation ne permet pas de déduire la nationalité d’un auteur.

Les sujets associés

Structural Behavior of Reinforced ConcreteConcrete Corrosion and DurabilityInnovative concrete reinforcement materials

BNTIC News n’est pas le producteur de ces données. Les publications sont interrogées à la demande dans Crossref, OpenAIRE, DOAJ, Europe PMC, HAL, DataCite, AfricArXiv, ROR et la Banque mondiale, sans clé d’accès. OpenAlex reste optionnel. Aucun service payant n’est nécessaire et aucune donnée externe n’est enregistrée en base. Consulter les sources et leurs limites.