Optimising Two-Stage Vacuum Heat Treatment for a High-Strength Micro-Alloyed Steel in Railway Spring Clip Application: Impact on Microstructure and Mechanical Performance
Rattachement africain : au, gb, cn. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
The heat treatment process is a vital step for manufacturing high-speed railway spring fasteners. In this study, orthogonal experiments were carried out to obtain reliable optimised heat treatment parameters through a streamlined number of experiments. Results revealed that a better comprehensive mechanical performance could be obtained under the following combination of heat treatment parameters: quenching temperature of 850 °C, holding time of 35 min, medium of 12% polyalkylene glycol (PAG) aqueous solution, tempering temperature of 460 °C, and holding time of 60 min. As one of the most important testing criteria, fatigue performance would be improved with increasing strength. Additionally, a high ratio of martensite to ferrite is proven to improve the fatigue limit more significantly. After this heat treatment process, the metallographic microstructure and mechanical properties satisfy the technical requirements for the high-speed railway practical operation. These findings provide a valuable reference for the practical forming process of spring fasteners.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Optimising Two-Stage Vacuum Heat Treatment for a High-Strength Micro-Alloyed Steel in Railway Spring Clip Application: Impact on Microstructure and Mechanical Performance
- Date Crossref
- 10/07/2023
- Éditeur
- MDPI AG
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
University of Wollongong pays non établi dans la noticeUniversité ou école supérieure
-
Cranfield University Welding and Additive Manufacturing Centre pays non établi dans la noticeUniversité ou école supérieure
-
University of Science and Technology Beijing pays non établi dans la noticeUniversité ou école supérieure
-
School of Mechanical pays non établi dans la noticeUniversité ou école supérieure
-
School of Materials Science and Engineering pays non établi dans la noticeUniversité ou école supérieure
University of Wollongong, Welding and Additive Manufacturing Centre — Cranfield University et University of Science and Technology Beijing, avec 2 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.