Fabrication of Biomedical Ti-Zr-Nb by Reducing Metal Oxides with Calcium Hydride
Rattachement africain : ru. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
In the present study, a powder of Ti-18Zr-15Nb biomedical alloy with spongy morphology and with more than 95% vol. of β-Ti was obtained by reducing the constituent oxides with calcium hydride. The influence of the synthesis temperature, the exposure time, and the density of the charge (TiO2 + ZrO2 + Nb2O5 + CaH2) on the mechanism and kinetics of the calcium hydride synthesis of the Ti-18Zr-15Nb β-alloy was studied. Temperature and exposure time were established as crucial parameters with the help of regression analysis. Moreover, the correlation between the homogeneity of the powder obtained and the lattice microstrain of β-Ti is shown. As a result, temperatures above 1200 °C and an exposure time longer than 12 h are required to obtain a Ti-18Zr-15Nb powder with a single β-phase structure and uniformly distributed elements. The analysis of β-phase growth kinetics revealed that the formation of β-Ti occurs due to the solid-state diffusion interaction between Ti, Nb, and Zr under the calcium hydride reduction of TiO2 + ZrO2 + Nb2O5, and the spongy morphology of reduced α-Ti is inherited by the β-phase. Thus, the results obtained provide a promising approach for manufacturing biocompatible porous implants from β-Ti alloys that are believed to be attractive candidates for biomedical applications. Moreover, the current study develops and deepens the theory and practical aspects of the metallothermic synthesis of metallic materials and can be compelling to specialists in powder metallurgy.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Fabrication of Biomedical Ti-Zr-Nb by Reducing Metal Oxides with Calcium Hydride
- Date Crossref
- 13/05/2023
- Éditeur
- MDPI AG
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Tula State University Mechanical Engineering and Materials Science Department pays non établi dans la noticeUniversité ou école supérieure
-
Yarsintez pays non établi dans la noticeStructure de recherche
-
Moscow Polytechnic University pays non établi dans la noticeUniversité ou école supérieure
-
National University of Science and Technology Center of Functional Nano-Ceramics pays non établi dans la noticeUniversité ou école supérieure
-
Baikov Institute of Metallurgy and Materials Science pays non établi dans la noticeStructure de recherche
-
Directorate pays non établi dans la noticeInstitution
-
A. A. Baikov Institute of Metallurgy and Material Science of the Russian Academy of Sciences The Department of Surface Physics and Chemistry and Ultrafine Powder Materials pays non établi dans la noticeStructure de recherche
Mechanical Engineering and Materials Science Department — Tula State University, Yarsintez et Moscow Polytechnic University, avec 4 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.