Effect of thermo-vacuum modification on selected chemical, physical, and mechanical properties of Siberian larch ( Larix sibirica L.) wood

Le résumé fourni par la source

The primary aim of this research was to investigate and evaluate the effects of thermo-vacuum modification through forced convection on selected chemical, physical, and mechanical characteristics of Siberian larch (Larix sibirica L.) wood. Larch wood boards were thermally-modified, using press-vacuum plant technology, for three hours at a temperature of 200 °C and a pressure of 350 mBar. In order to characterise the thermally-modified (TH) and unmodified (CTRL) wood samples, the extractives, lignin and holocellulose content, volumetric swellings, compression strength, and modulus of elasticity (MOE) were determined. Gas chromatographic-mass spectrometric (GC-MS) analysis revealed chemical compound changes as a result of the thermal modification process where some extractives became undetectable after treatment while some new extractives were detected. Thermally-modified larch wood exhibited lower volumetric swelling compared to the untreated samples. Markedly, thermally-modified larch wood had lower tendency to absorb moisture. In addition, thermally-treated wood had slightly higher compression strength parallel to the grain, which was 0.29% higher than that of unmodified samples. Meanwhile, a 7.6% reduction in MOE was recorded in the thermally-treated wood.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.