Parametric optimisation of friction stir welding on aluminium alloy (EN AW-1100) plates
Rattachement africain : pk, no, cn. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
Friction stir welding is a solid-state welding process used extensively for aluminium alloys. EN AW-1100 alloy is mostly used for its exceptional corrosion resistance, high ductility, high thermal and electrical conductivities, and cost-effectiveness. This study is focused on the optimisation of friction stir welding parameters to achieve enhanced mechanical properties of 5mm thick EN AW-1100 alloy plates welded with a single pass, using Taguchi L9 orthogonal array and ANOVA analysis. Experimental results revealed that maximum tensile strength of 79 MPa and percentage elongation of 38.87 % were achieved. The maximum Vickers hardness achieved in the stir zone was 34.15. These results were used for optimisation using Minitab and it was determined that 2000 RPM, 30 mm·min−1 traverse speed and square probe profile came out to be the best parameters for maximum tensile strength. 4000 RPM, 30 mm·min−1 traverse speed and square probe geometry were the best parameters for maximum hardness in the stir zone. ANOVA analysis showed that the most significant parameter for tensile strength was traverse speed. None of the considered parameters were influencing the hardness value in the stir zone at a 95 % confidence level.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Parametric optimisation of friction stir welding on aluminium alloy (EN AW-1100) plates
- Date Crossref
- 02/05/2023
- Éditeur
- Czech Technical University in Prague - Central Library
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Pakistan Institute of Engineering and Applied Sciences pays non établi dans la noticeUniversité ou école supérieure
-
Institute of Space Technology pays non établi dans la noticeUniversité ou école supérieure
-
Norwegian University of Science and Technology pays non établi dans la noticeUniversité ou école supérieure
-
Tsinghua University Pakistan Institute of Engineering and Applied Sciences pays non établi dans la noticeUniversité ou école supérieure
-
Hydal Aluminium Profiler (Norway) pays non établi dans la noticeEntreprise
-
Norsk Hydro (Norway) pays non établi dans la noticeEntreprise
-
Hydro Aluminium AS pays non établi dans la noticeInstitution
Pakistan Institute of Engineering and Applied Sciences, Institute of Space Technology et Norwegian University of Science and Technology, avec 4 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.