High-Temperature Syngas Desulfurization and Particulate Filtration by ZnO/Ceramic Filters

Le résumé fourni par la source

High Resolution Image Download MS PowerPoint Slide Combustible gas (e.g., gasification syngas) cleaning at high temperatures can obtain further gains in energy efficiency for power generation and importantly leads to a simplified process and lower cost as a commercially viable source of clean energy. Thus, a feasibility study for high-temperature desulfurization (HTDS) and additional high-temperature particulate filtration (HTPF) of a raw syngas using ZnO sorbent-dispersed Raney CuO (ZnO/R-CuO) and ceramic filter (ZnO/CF) has been carried out. By synchrotron X-ray absorption near-edge structure (XANES) spectroscopy, mainly Zn(II) and Cu(II) are found in the ZnO/R-CuO sorbents. Both ZnO and R-CuO in the sorbents are involved in HTDS (1% H 2 S) at 873 K to form ZnS, Cu 2 S, and a small amount of CuS and reach relatively high HTDS efficiencies (82–90%). In addition, regeneration of the sulfurized sorbent by oxidation with O 2 at 873 K (HTRG) for 1 h can restore ZnO and CuO for continuous and repetitive HTDS-HTRG cycles. To facilitate the HTDS engineering applications by the ZnO/R-CuO sorbents, their reaction rate constant (8.35 × 10 4 cm 3 /g/min) and activation energy (114.8 kJ/mol) at 873 K have also been determined. Furthermore, the ZnO/CF sorbent/filter can perform HTDS and additional HTPF at 873 K with very high particulate removal efficiencies (>98%). This demonstrates the feasibility for hot-syngas cleaning with a much better energy efficiency and lesser cost for cleaner power generation.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.