Texturing Methods of Abrasive Grinding Wheels: A Systematic Review
Rattachement africain : pt. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
Creating textures on abrasive wheels is a strategy that allows a significant improvement in grinding operations. The reduction of the internal stresses in the workpiece and the temperature during the grinding operation generates an increase in the dimensional accuracy of the workpiece and a longer tool life. Textured abrasive wheels can be produced in many different ways. Depending on the processing method, the dimensional accuracy of the tool and its applicability is changed. Some methods can produce tools with three-dimensional grooves; there are also methods that are employed for the re-texturing of grooves after the grooved zone wears out. In the literature, the benefits of textured grinding wheels over traditional wheels have been extensively discussed. However, information on the particularities of texturing methods is still lacking. To clarify the advantages, limitations, and main advances regarding each of the groove production methods, the authors of this article carried out a systematic review. The objective of this work is to establish the factors that are affected by groove production methods and the technological advances in this area. The benefits and drawbacks of various grooving techniques are then reviewed, and potential study areas are indicated.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Texturing Methods of Abrasive Grinding Wheels: A Systematic Review
- Date Crossref
- 14/11/2022
- Éditeur
- MDPI AG
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Polytechnic Institute of Bragança pays non établi dans la noticeUniversité ou école supérieure
-
Centro de Investigação de Montanha pays non établi dans la noticeUniversité ou école supérieure
-
Labbels pays non établi dans la noticeUniversité ou école supérieure
-
University of Minho Center for Microelectromechanical Systems (CMEMS) pays non établi dans la noticeUniversité ou école supérieure
-
Centro de Física das Universidades do Minho e do Porto pays non établi dans la noticeStructure de recherche
-
Instituto Politécnico de Bragança Centro de Investigação de Montanha (CIMO) pays non établi dans la noticeStructure de recherche
-
Universidades do Minho e Porto Centro de Física pays non établi dans la noticeUniversité ou école supérieure
Polytechnic Institute of Bragança, Centro de Investigação de Montanha et Labbels, avec 4 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.