Thermal Contact Resistance between Mold Steel and Additively Manufactured Insert for Designing Conformal Channels: An Experimental Study
Rattachement africain : pt. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
The focus of this research is on thermal contact resistance between a mold and its insert, specifically inserts made by additive manufacturing (AM). Using a thermal steady-state system and varying contact pressures (0, 50, 75, and 100 bars), we present experimental results of the thermal contact resistance at the contact interface between steel A (1.2344), obtained from an extruded rod, and steel B (1.2709), produced by laser powder bed fusion. Thermal tests were performed for unbonded and bonded configurations. Results showed that increasing the contact pressure allows the system equilibrium to be reached at lower temperatures. Furthermore, thermal tests showed that in the transition zone of the bonded configuration, a well-defined resistance is not formed between the two steel samples as it occurs in the unbonded configuration. For the unbonded configuration, the thermal contact resistance values decrease with increasing applied contact pressure, improving the system’s heat transfer.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Thermal Contact Resistance between Mold Steel and Additively Manufactured Insert for Designing Conformal Channels: An Experimental Study
- Date Crossref
- 13/09/2022
- Éditeur
- MDPI AG
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Labbels pays non établi dans la noticeUniversité ou école supérieure
-
University of Minho CMEMS-UMinho—Center for Microelectromechanical Systems pays non établi dans la noticeUniversité ou école supérieure
-
Prifer—Fundição pays non établi dans la noticeInstitution
-
MEtRICs—Mechanical Engineering and Resource Sustainability Center pays non établi dans la noticeInstitution
Labbels, CMEMS-UMinho—Center for Microelectromechanical Systems — University of Minho et Prifer—Fundição, avec 1 autre affiliation.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.