Past and Future Practical Solutions for Torsional Vibration Damping in Vehicle Industry
Rattachement africain : hu, de. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
In addition to material and production costs, consumption and emission limits, the requirements for performance, efficiency and space utilization must be met when it comes to the design of today's internal combustion engines for the automotive industry. As a result, three new design trends have been emerged (based on J. Pfleghaar and B. Lohmann's paper in 2013): 1. downsizing: reduction of engine size (number of pistons and stroke) for fuel and space-saving and CO2 emission reduction purposes, 2. downspeeding: reduction of engine speed to save fuel, which necessarily entails significantly higher torques being generated and transmitted in the engine, 3. turbo supercharging: increasing the pressure and compression ratio in the engine piston cylinder to cover the increased torque demand, which is accompanied by NOx gas emissions. Due to these new design trends, significant transverse, axial, and torsional oscillations can occur on the engine's crankshaft. To avoid power loss and fatigue due to the torsional oscillations, a torsional vibration damper is advised to be installed on the free end of the crankshaft or integrated into the flywheel. This review paper focuses on the possible reasons for torsional vibrations, the applied methods used to dampen them, and expected future trends.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Past and Future Practical Solutions for Torsional Vibration Damping in Vehicle Industry
- Date Crossref
- 08/08/2022
- Éditeur
- Periodica Polytechnica Budapest University of Technology and Economics
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Budapest University of Technology and Economics pays non établi dans la noticeUniversité ou école supérieure
-
Knorr-Bremse (Germany) pays non établi dans la noticeEntreprise
-
Edutus University <p>Engineering Institute pays non établi dans la noticeUniversité ou école supérieure
-
Faculty of Transportation Engineering and Vehicle Engineering <p>Department of Aeronautics and Naval Architecture pays non établi dans la noticeUniversité ou école supérieure
-
D Center Budapest pays non établi dans la noticeInstitution
Budapest University of Technology and Economics, Knorr-Bremse (Germany) et <p>Engineering Institute — Edutus University, avec 2 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.