A Framework for Improving Wall-to-Wall Canopy Height Mapping by Integrating GEDI LiDAR

Le résumé fourni par la source

Spatially continuous canopy height is a vital input for modeling forest structures and functioning. The global ecosystem dynamics investigation (GEDI) waveform can penetrate a canopy to precisely find the ground and measure canopy height, but it is spatially discontinuous over the earth’s surface. A common method to achieve wall-to-wall canopy height mapping is to integrate a set of field-measured canopy heights and spectral bands from optical and/or microwave remote sensing data as ancillary information. However, due partly to the saturation of spectral reflectance to canopy height, the product of this method may misrepresent canopy height. As a result, neither GEDI footprints nor interpolated maps using the common method can accurately produce spatially continuous canopy height maps alone. To address this issue, this study proposes a framework of point-surface fusion for canopy height mapping (FPSF-CH) that uses GEDI data to calibrate the initial wall-to-wall canopy height map derived from a sub-model of FPSF-CH. The effectiveness of the proposed FPSF-CH was validated by comparison to canopy heights derived from (1) a high-resolution canopy height model derived from airborne discrete point cloud lidar across three test sites, (2) a global canopy height product (GDAL RH95), and (3) the results of the FPSF-CH sub-model without fusing with the GEDI canopy height. The results showed that the RMSE and rRMSE of FPSF-CH were 3.82, 4.05, and 3.48 m, and 18.77, 16.24, and 13.81% across the three test sites, respectively. The FPSF-CH achieved improvement over GDAL RH95, with reductions in RMSE values of 1.28, 2.25, and 2.23 m, and reductions in rRMSE values of 6.29, 9.01, and 8.90% across the three test sites, respectively. Additionally, the better performance of the FPSF-CH compared with its sub-model further confirmed the effectiveness of integrating GEDI data for calibrating wall-to-wall canopy height mapping. The proposed FPSF-CH integrates GEDI LiDAR data to provide a new avenue for accurate wall-to-wall canopy height mapping critical to applications, such as estimations of biomass, biodiversity, and carbon stocks.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.