The Innovated Flexible Surface Acoustic Wave Devices on Fully InkJet Printing Technology
Rattachement africain : tw. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
An innovated fabricated process of the flexible surface acoustic wave (SAW) device is proposed in this study. Fully inkjet printing and sol-gel technology are used in this fabricated process. The flexible SAW device is composed of a ZnO layer sandwiched in between a flexible polyimide plastic sheet and two sets of interdigital transducers layer. The material of the top interdigital transducer layer is nano silver. The ZnO solution is prepared by sol-gel technology. Both the ZnO and top interdigital transducer layers are deposited by inkjet printing. The fully inkjet printing process possesses the advantages of direct patterning and low-cost. It does not require photolithography and etching processes since the pattern is directly printed on the flexible sheet. The center frequency of this prototype is matched with the design frequency. The prototype demonstrates that the presented flexible SAW device is available for the possible application in future. It may be applied to the sensing on curve surface.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- The Innovated Flexible Surface Acoustic Wave Devices on Fully InkJet Printing Technology
- Date Crossref
- 01/01/2013
- Éditeur
- Informa UK Limited
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
National University of Tainan Department of Electric Engineering pays non établi dans la noticeUniversité ou école supérieure
-
National Cheng Kung University Department of Mechanical Engineering pays non établi dans la noticeUniversité ou école supérieure
-
National Ilan University Department of Mechanical and Electromechanical Engineering pays non établi dans la noticeUniversité ou école supérieure
Department of Electric Engineering — National University of Tainan, Department of Mechanical Engineering — National Cheng Kung University et Department of Mechanical and Electromechanical Engineering — National Ilan University.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.