A Study on Deformation According to Welding Speed of Root Pass in GTAW Butt Joint Welding
Rattachement africain : kr. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
In carbon steel butt joint welding, uniform back bead formation and reduction of weld deformation are important.In most industrial sites, Ceramic backing is used for V-grooves for uniform back bead formation in FCAW and SAW.In this case, because the root pass has a large deposition area and a high heat input, a problem can occur where angular distortion occurs during cooling.In this study, to reduce weld deformation and form uniform back beads that angular distortion was measured using ceramic backing and Cu backing using GTAW with ER70S-60 C-filler.Angular distortion was measured according to welding speed for the same deposition area for each kind of backing.And we also examined the angular distortion phenomenon in relation to the type of backing.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- A Study on Deformation According to Welding Speed of Root Pass in GTAW Butt Joint Welding
- Date Crossref
- 30/10/2019
- Éditeur
- The Korean Welding and Joining Society
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Pukyong National University pays non établi dans la noticeUniversité ou école supérieure
-
Pukyong Nat'l Univ Dept. of Advanced Materials System Engineering pays non établi dans la noticeUniversité ou école supérieure
Pukyong National University et Dept. of Advanced Materials System Engineering — Pukyong Nat'l Univ.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.