Amorphous Steel Coatings Deposited by Cold-Gas Spraying
Rattachement africain : it. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
Cold-gas spray (CGS) deposition of amorphous steel coatings starting from a commercial feedstock powder containing boron, tungsten, and silicon was investigated. Microstructural characterization, carried out by X-ray diffraction (XRD), transmission electron microscopy, and backscattered electron diffraction (EBSD) analysis, confirmed the amorphous nature of deposited coatings. The amorphization phenomenon is related to high-strain/strain-rate deformation with shear instability caused by very high particle kinetic energy, with a mechanism that resembles the severe plastic deformation process. The CGS coatings were heat-treated at temperatures ranging from 650 to 850 °C to induce partial recrystallization. The effect of nanocrystal nucleation and growth on the hardness of the coatings was investigated, and the hardness of heat-treated samples was found to increase with respect to as-sprayed coatings, outperforming conventional high-velocity oxy-fuel (HVOF) deposits. Hardness was found to decrease after prolonged (<90 min) or higher temperature (>750 °C) exposures.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Amorphous Steel Coatings Deposited by Cold-Gas Spraying
- Date Crossref
- 12/06/2019
- Éditeur
- MDPI AG
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
RINA Consulting - Centro Sviluppo Materiali S.p.A. (Italy) pays non établi dans la noticeEntreprise
-
BioAge (Italy) pays non établi dans la noticeEntreprise
-
Sapienza University of Rome INSTM Reference Laboratory for Engineering of Surface Treatments pays non établi dans la noticeUniversité ou école supérieure
-
Centro Sviluppo Materiali S.p.A. and Lamezia Terme (CZ) Branch Office—Italy pays non établi dans la noticeInstitution
RINA Consulting - Centro Sviluppo Materiali S.p.A. (Italy), BioAge (Italy) et INSTM Reference Laboratory for Engineering of Surface Treatments — Sapienza University of Rome, avec 1 autre affiliation.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.