Study on influence of the PTA-P welding process parameters on corrosion behavior of Inconel 625 coatings
Rattachement africain : br. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
In the present work, PTA welding process was used to investigate the influence of welding parameters on the dilution, microhardness and corrosion resistance of Inconel 625 alloy coatings on the API 5L X70 grade steel. The electrochemical impedance spectroscopy (EIS) and linear potentiodynamic polarization (LPP) measurements were used to study the protection properties of the deposited layer when immersed in a 3.5% NaCl solution. The results of EIS and LPP have shown that the corrosion resistance results were more satisfactory for coatings with higher dilution index. The results also showed that the dilution values D (%)varied from 15.33% to 4.39% at the maximum (18.99 kJ/cm) and the minimum (8.34 kJ/cm) welding energy levels. The most relevant dilution value obtained was 4.39%.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Study on influence of the PTA-P welding process parameters on corrosion behavior of Inconel 625 coatings
- Date Crossref
- 01/01/2019
- Éditeur
- FapUNIFESP (SciELO)
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Universidade Federal de Campina Grande pays non établi dans la noticeUniversité ou école supérieure
-
Universidade Federal da Paraíba pays non établi dans la noticeUniversité ou école supérieure
-
Federal University of Campina Grande Department of Mechanical Engineering pays non établi dans la noticeUniversité ou école supérieure
Universidade Federal de Campina Grande, Universidade Federal da Paraíba et Department of Mechanical Engineering — Federal University of Campina Grande.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.