Aller au contenu principal
Accès ouvert déclaré 2018 article

Settlement Prediction of a Group of Lightweight Aggregate (LECA) Columns Using Finite Element Modelling

4Citations signalées, ce qui n’est pas une note de qualité
4Institutions déclarées
1Pays d’affiliation déclarés

Rattachement africain : my. Niveau de preuve : code pays fourni par la source.

Le résumé fourni par la source

The method of reinforcing the soft clays with stone columns is the most commonly adopted technique to enhance its load carrying capacity and to reduce settlements. Their performance with respect to bearing capacity is well researched, but the understanding of settlement characteristics still requires extensive investigations. Moreover, no studies have been made to explore the effectiveness of stone columns using Lightweight Expanded Clay Aggregate (LECA) as filler material replacing normal stone/aggregates in order to improve settlement behavior of soft clay. LECA is known as a common lightweight material that have been applied successfully in civil engineering works where weight is an issue because the materials can help to reduce dead loads and lateral forces by more than half in installations over structures and those with soft soils. The purpose of this work is to assess the suitability of reinforcing technique by LECA columns to improve the settlement through finite element. The analysis of performance of LECA column in soft soil improvement was conducted through finite elements methods by using Plaxis 3D commercial software. Based on the results the settlement ratio was reduced as the column length increased until unity at end bearing condition where β=1.0. It is also observed that bulging was reduced with closer spacing between LECA columns.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.

Le contrôle bibliographique ouvert

DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.

Titre Crossref
Settlement Prediction of a Group of Lightweight Aggregate (LECA) Columns Using Finite Element Modelling
Date Crossref
30/11/2018
Éditeur
Science Publishing Corporation
Type
journal-article

Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.

Où se fait cette recherche

  • Universiti Malaysia Pahang Al-Sultan Abdullah pays non établi dans la notice
    Université ou école supérieure
  • University of Technology Malaysia pays non établi dans la notice
    Université ou école supérieure
  • Hospital Pulau Pinang pays non établi dans la notice
    Établissement de santé
  • Universiti Teknologi MARA pays non établi dans la notice
    Université ou école supérieure
  • Fakulti Kejuruteraan Awam & Sumber Alam pays non établi dans la notice
    Institution
  • Centre of Tropical Geoengineering pays non établi dans la notice
    Institution

Universiti Malaysia Pahang Al-Sultan Abdullah, University of Technology Malaysia et Hospital Pulau Pinang, avec 3 autres affiliations.

Une affiliation ne permet pas de déduire la nationalité d’un auteur.

Les sujets associés

Geotechnical Engineering and Soil StabilizationGeotechnical Engineering and AnalysisGrouting, Rheology, and Soil Mechanics

BNTIC News n’est pas le producteur de ces données. Les publications sont interrogées à la demande dans Crossref, OpenAIRE, DOAJ, Europe PMC, HAL, DataCite, AfricArXiv, ROR et la Banque mondiale, sans clé d’accès. OpenAlex reste optionnel. Aucun service payant n’est nécessaire et aucune donnée externe n’est enregistrée en base. Consulter les sources et leurs limites.