Aller au contenu principal
Accès ouvert déclaré 2018 conference-paper

Physical and Mechanical Properties of Lightweight Expanded Clay Aggregate (LECA)

46Citations signalées, ce qui n’est pas une note de qualité
3Institutions déclarées
2Pays d’affiliation déclarés

Rattachement africain : my, ir. Niveau de preuve : code pays fourni par la source.

Le résumé fourni par la source

Lightweight aggregate is the generic name of a group of aggregates having a relative density lower than normal aggregates (natural sand, gravel, and crushed stone), sometimes is referred to as low density aggregate. Depending on the source and the method of production, lightweight aggregates exhibit considerable differences in particle shape, texture and properties. Lightweight expanded clay aggregate (LECA) is among the common lightweight materials that have been applied successfully in civil engineering works. Many studies have been conducted to investigate the performances of LECA used in structural and geotechnical applications. They are favourable materials used in projects where weight is an issue because the materials can help reduce dead loads and lateral forces by more than half in installations over structures and those with soft soils. LECA is an eco-friendly nature-based waste product that combines the same benefits as brick tiles. LECA is indestructible, non-combustible, and impervious to attack by dry-rot, wet-rot and insects. This paper focused on the properties of LECA aggregates supplied by LEXCA Sdn. Bhd. through laboratory tests in accordance to the standard specifications. The properties of several LECA produced from different country and production plants are also reviewed for comparative purpose. In addition, the material properties evaluated from previously conducted research also was discussed. It was found that, even though LECA was produced from the same raw materials, it has certain range of property values. The properties of LECA shows their suitability and potential for replacing natural aggregates in many civil engineering works. It is hoped that, the properties presented in this paper could help others who conduct study especially numerical analysis using LECA as geotechnical materials.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.

Le contrôle bibliographique ouvert

DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.

Titre Crossref
Physical and Mechanical Properties of Lightweight Expanded Clay Aggregate (LECA)
Date Crossref
01/01/2018
Éditeur
EDP Sciences
Type
journal-article

Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.

Où se fait cette recherche

  • Universiti Malaysia Pahang Al-Sultan Abdullah pays non établi dans la notice
    Université ou école supérieure
  • University of Technology Malaysia pays non établi dans la notice
    Université ou école supérieure
  • Kermanshah University of Technology Department of Civil Engineering pays non établi dans la notice
    Université ou école supérieure
  • Centre of Tropical Geoengineering pays non établi dans la notice
    Institution
  • Fakulti Kejuruteraan Awam & Sumber Alam pays non établi dans la notice
    Institution

Universiti Malaysia Pahang Al-Sultan Abdullah, University of Technology Malaysia et Department of Civil Engineering — Kermanshah University of Technology, avec 2 autres affiliations.

Une affiliation ne permet pas de déduire la nationalité d’un auteur.

Les sujets associés

Geotechnical Engineering and Soil StabilizationInnovative concrete reinforcement materialsGeotechnical and construction materials studies

BNTIC News n’est pas le producteur de ces données. Les publications sont interrogées à la demande dans Crossref, OpenAIRE, DOAJ, Europe PMC, HAL, DataCite, AfricArXiv, ROR et la Banque mondiale, sans clé d’accès. OpenAlex reste optionnel. Aucun service payant n’est nécessaire et aucune donnée externe n’est enregistrée en base. Consulter les sources et leurs limites.