An Accurate Virtual Signal Injection Control of MTPA for an IPMSM With Fast Dynamic Response
Rattachement africain : cn, gb. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
A maximum torque per ampere (MTPA) control based on virtual signal injection for an interior permanent magnet synchronous motor with fast dynamic response is proposed in this paper. A small square wave signal is mathematically injected into the current angle for accurately tracking MTPA points. The extracted derivative of electromagnetic torque is utilized to compensate the initially set current angle to the real MTPA operation current angle. Due to the absence of bandpass and low-pass filters, which are essential in the sinusoidal injected signal scheme, this method shows good dynamic response. By incorporating a modified equation for the torque after signal injection, the steady-state accuracy is also enhanced. The d - and q-axis current references are obtained through the current vector magnitude and optimal current angle instead of using the torque equation with nominal motor parameters, which guarantees the accuracy of the output torque. The proposed scheme is parameter independent, and no real signal is injected to the current or voltage command. Thus, the problems of the high-frequency signal injection method are avoided. A prototype is set up, and experiments are carried out to verify effectiveness and robustness of the proposed control scheme.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- An Accurate Virtual Signal Injection Control of MTPA for an IPMSM With Fast Dynamic Response
- Date Crossref
- 01/09/2018
- Éditeur
- Institute of Electrical and Electronics Engineers (IEEE)
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Zhejiang University pays non établi dans la noticeUniversité ou école supérieure
-
Hebei University of Technology State Key Laboratory of Reliability and Intelligence of Electrical Equipment pays non établi dans la noticeUniversité ou école supérieure
-
State Key Laboratory of Reliability and Intelligence of Electrical Equipment pays non établi dans la noticeStructure de recherche
-
Aston University pays non établi dans la noticeUniversité ou école supérieure
-
University of Nottingham Ningbo China pays non établi dans la noticeUniversité ou école supérieure
-
College of Electrical Engineering pays non établi dans la noticeUniversité ou école supérieure
-
School of Engineering and Applied Science pays non établi dans la noticeUniversité ou école supérieure
Zhejiang University, State Key Laboratory of Reliability and Intelligence of Electrical Equipment — Hebei University of Technology et State Key Laboratory of Reliability and Intelligence of Electrical Equipment, avec 4 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.