Matlab Toolbox to Perform Secondary Quality Control (2nd QC) on Hydrographic Data

Résumé fourni par la source

Secondary quality control is a process in which data are objectively studied to quantify systematic biases in the measurements. The identified data biases are subjectively compared to predetermined accuracy limits. If the data from the cruise being analyzed show significant bias, this may indicate that an adjustment (either multiplicative or additive) needs to be made to the data, or that there is a systematic problem in the data generation or calibration. It is not recommended that data be adjusted solely on the basis of a secondary QC, but rather that it be stated in the meta-data that there may be a bias and why. At best, the source of the bias will be identified (for example, a problem with the standard used) and corrected. \nUsing this package allows crossover analysis to be performed. Crossover analysis is an objective comparison of deep water data from one cruise with data from other cruises in the same area (e.g., Sabine et al. 1999, Gouretski and Jancke 2001, Johnson et al. 2001, Sabine et al. 2005, Tanhua et al., 2010, see also http://cdiac.esd.ornl.gov/oceans/glodap/crossover.html). The scripts in this package are modified versions of the scripts used by the CARINA project; see Tanhua et al. 2010for more information. An extract of that information is given below.

Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.