Development of Macroporous Silicone Rubber for Acoustic Applications
Rattachement africain : in. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
This work reports a comprehensive and scalable acoustic material preparation by a medium internal phase emulsion-templating technique from a single-part room temperature vulcanizable silicone rubber and pore generator (water and mineral oil mixture). By optimization of the mixing conditions, the pore-generator-volume and cure-schedule macroporous sound-absorbing silicone rubber was developed. By optical and scanning electron microscopy, the pore size, their interconnectivity, and heterogeneity were analyzed. For an optimized sample (0.5 volume-ratio water and 3.67 volume % mineral oil, porosity ∼83%, thickness ∼12.5 ± 1 mm) the average sound absorption coefficient and transmission loss measured by an impedance tube technique in 50−6400 Hz were ∼0.45 and 6.7−42 dB, respectively. Insertion loss measurements in 125–6300 Hz with the material as cladding inside (100%) and outside (85%) of an acoustical enclosure demonstrated minimum/maximum noise reduction of 2.31 dB at 630 Hz/20.9 dB at 4000 Hz and 3.55 dB at 400 Hz/13.71 dB at 2000 Hz, respectively.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Development of Macroporous Silicone Rubber for Acoustic Applications
- Date Crossref
- 04/08/2016
- Éditeur
- American Chemical Society (ACS)
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Indian Institute of Technology Patna pays non établi dans la noticeUniversité ou école supérieure
-
Bharat Heavy Electricals (India) pays non établi dans la noticeEntreprise
-
Indian Institute of Technology (IIT)-Patna Materials Science and Engineering pays non établi dans la noticeStructure de recherche
-
§ Centre for Nanotechnology and ‡ Machine Dynamics & Failure Analysis Laboratory pays non établi dans la noticeStructure de recherche
Indian Institute of Technology Patna, Bharat Heavy Electricals (India) et Materials Science and Engineering — Indian Institute of Technology (IIT)-Patna, avec 1 autre affiliation.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.