Monitoring of a Hot Melt Coating Process via a Novel Multipoint Near-Infrared Spectrometer
Rattachement africain : at, de. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
The aim of the present work was to develop a PAT strategy for the supervision of hot melt coating processes. Optical fibers were placed at various positions in the process chamber of a fluid bed device. Experiments were performed to determine the most suitable position for in-line process monitoring, taking into account such requirements as a good signal to noise ratio, the mitigation of dead zones, the ability to monitor the product over the entire process, and reproducibility. The experimental evidence suggested that the position at medium fluid bed height, looking towards the center, i.e., normal to particle movement, proved to be the most reliable position. In this study, the advantages of multipoint monitoring are shown, and an in-line-implementation was created. This enabled the real-time supervision of the process, including the fast detection of inhomogeneities and disturbances in the process chamber, and the compensation of sensor malfunction. In addition, a model for estimating the particle size distribution via NIR was successfully created. This ensures that the quality of the product and the endpoint of the coating process can be determined correctly.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Monitoring of a Hot Melt Coating Process via a Novel Multipoint Near-Infrared Spectrometer
- Date Crossref
- 02/03/2016
- Éditeur
- Springer Science and Business Media LLC
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Research Center Pharmaceutical Engineering (Austria) pays non établi dans la noticeEntreprise
-
Graz University of Technology Institute for Process and Particle Engineering pays non établi dans la noticeUniversité ou école supérieure
-
Hermes Arzneimittel (Germany) pays non établi dans la noticeEntreprise
-
Gesundheit Österreich pays non établi dans la noticeÉtablissement de santé
-
University of Graz Institute of Pharmaceutical Sciences pays non établi dans la noticeUniversité ou école supérieure
-
Research Center Pharmaceutical Engineering GmbH pays non établi dans la noticeStructure de recherche
-
Hermes Arzneimittel GmbH pays non établi dans la noticeEntreprise
-
Romaco Innojet pays non établi dans la noticeInstitution
-
EVK DI Kerschhaggl GmbH pays non établi dans la noticeEntreprise
-
CREMER OLEO GmbH & Co. KG pays non établi dans la noticeEntreprise
Research Center Pharmaceutical Engineering (Austria), Institute for Process and Particle Engineering — Graz University of Technology et Hermes Arzneimittel (Germany), avec 7 autres affiliations.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.