Analysis of Mold Level Hunching by Unsteady Bulging during Thin Slab Casting.
Rattachement africain : kr. Niveau de preuve : code pays fourni par la source.
Le résumé fourni par la source
In order to analyze the phenomenon of mold level hunching (MLH) during thin slab casting process, the variation of the mold level and the bulging of strand were measured and analyzed using Fast Fourier Transform (FFT) spectrum analysis. Both of mold level hunching and bulging had the same frequency and the specific frequency corresponded to the main roll pitch of the thin slab caster. The unsteady bulging was found to be a main reason of mold level hunching. The unsteady bulging profile through the full range of the caster and the height of mold level hunching were calculated using a heat transfer model and a continuous beam model. The effects of process variables on mold level hunching and the process condition of reducing mold level hunching were studied. The amount of mold level hunching increased as unsteady bulging increased due to the hunching of casting speed. An aperiodic roll pitch between segments could be effective in reducing mold level hunching.
Ce résumé expose les affirmations des auteurs. BNTIC ne l’interprète pas comme une validation indépendante des résultats.
Le contrôle bibliographique ouvert
DOI retrouvé dans Crossref DOI retrouvé ; titre concordant.
- Titre Crossref
- Analysis of Mold Level Hunching by Unsteady Bulging during Thin Slab Casting.
- Date Crossref
- 01/01/2002
- Éditeur
- Iron and Steel Institute of Japan
- Type
- journal-article
Ce recoupement confirme des métadonnées liées au DOI. Il ne confirme ni la méthode ni les conclusions de l’étude, et il ne compte pas comme une seconde source scientifique indépendante.
Où se fait cette recherche
-
Pohang Iron and Steel (South Korea) pays non établi dans la noticeEntreprise
-
Seoul National University pays non établi dans la noticeUniversité ou école supérieure
-
Pohang Iron & Steel Co. Ltd Technical Research Laboratories pays non établi dans la noticeEntreprise
-
School of Materials Science and Engineering pays non établi dans la noticeUniversité ou école supérieure
Pohang Iron and Steel (South Korea), Seoul National University et Technical Research Laboratories — Pohang Iron & Steel Co. Ltd, avec 1 autre affiliation.
Une affiliation ne permet pas de déduire la nationalité d’un auteur.